Oxfordshire · England
Bath re-enamelling & resurfacing in Broughton, Oxfordshire
Fixed-price bath re-enamelling in Broughton and the surrounding area, typically in one visit.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A dull, rough surface that won’t come clean
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Bath re-enamelling in Broughton, done in place
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. If you are dealing with a period or roll-top bath worth keeping and worn patches where water runs and sits, we can help.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Location
- Broughton (OX15)
- County
- Oxfordshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Can I fix it myself?
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Broughton: your questions answered
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Is there a guarantee?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
How long will the bath be out of use?
Usually a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Do the materials smell?
There can be some smell while we work, so we ventilate the room. It fades as everything cures.
How it works
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. The job generally runs to most of the day, tidy-up included.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can generally be used the day after.
Getting ready for the visit
- Tell us about parking, stairs or access
- Clear the area around the damage
- Open a window if you can
Getting a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Advice
Work for landlords and builders
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We work for landlords, letting agents and housing providers in Broughton as well as householders. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
More services for Broughton
What bath re-enamelling costs
Resurfacing from £350. Prices are worked out job by job, from your pictures. What matters most is:
- How hard the colour is to match
- The size and number of damaged areas
- Where the damage is and how we get to it
- How many items we do on one visit
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Getting a price from pictures
When you take your photos, these tips help us give you a firm price:
- Natural light rather than flash
- A wider photo showing the entire bath
- The postcode, so we can plan the visit
- A coin beside the damage so we can judge size
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
What we cannot put right
A repair is not always the answer, and we will tell you before we start. Repairs won’t solve:
- An acrylic bath that flexes badly underfoot
- Problems we cannot see until an old finish comes off
- A bath split right through the body
If in doubt, send photos and we will say what we think.
Materials we work on in Broughton
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
How to care for the repair
Nothing complicated is needed:
- Have chips seen to early
- Wipe the bath dry after use in hard water areas
- Don’t leave bottles, razors or sponges standing on the surface
- Never use suction bath mats
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Repairing versus replacing in Broughton
Replacing a bath generally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, with the bath ready the next day. Prices start from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
What you get with us
- One price list for the entire UK
- Honest advice, even when it means no job
- Colours mixed by hand to suit your surface
- One-year guarantee on every repair
Read our prices page and guide to resurfacing and replacement costs.
Our work in Broughton
Broughton is about 2 miles south-west of Banbury, in Oxfordshire. Wherever you are in the OX15 postcode area, a technician comes to you. Broughton is one of 443 places in Oxfordshire where we work. We work right across the region, from Broughton to Birmingham (about 37 miles away).
Postcode districts we cover here: OX15. Jobs here include addresses on Danvers Close, Danvers Road and Wykham Lane. We also cover the places around Broughton: North Newington (1 mile north), Neithrop (2 miles north-east), Ruscote (2 miles north-east), Bloxham (2 miles south) and Drayton (2 miles north). We also work in nearby towns such as Bicester (14 miles south-east), Bure Park (13 miles south-east), Chipping Norton (10 miles south-west), Grimsbury (3 miles north-east), Woodstock (14 miles south) and Bodicote (3 miles east).
Landmarks near Broughton
Typical jobs here are in homes near Tudor Hall School, Bishop Carpenter Church of England Aided Primary School and The Warriner School. You’ll also find Church of St Mary the Virgin (within half a mile west) and The Roebuck Public House (0.9 miles north). The closest station to Broughton is Banbury station, roughly 2.7 miles north-east of the centre. Well-known places in the area include Bloxham Village Museum (1.8 miles south) and Castle Quay Shopping Centre (2.6 miles north-east). Open spaces near Broughton include Crouch Hill and Woodford Bottom and Lamb's Pool.
About our accreditations · Every repair comes with a one-year guarantee.
