East Sussex · England
Bath Re-enamelling for Brownbread Street homes
Full bath re-enamelling and resurfacing for homes and businesses in Brownbread Street and across East Sussex. Free, fixed quotes from your photos.
- Resurfacing from £350
- Worn patches where water runs and sits
- Brown or grey marks that don’t clean off
About our bath re-enamelling in Brownbread Street
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the whole bath is tired rather than one spot. Our technicians work on pressed steel baths, cast iron baths and Victorian roll-tops, and common reasons people contact us are lots of chips and rust spots and enamel that’s lost its shine and feels rough.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Area
- Brownbread Street (TN33)
- Area hub
- East Sussex
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Why repair rather than replace?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Nothing else is disturbed. Prices start from £350. We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why Brownbread Street customers choose us
- Straight answers about what a repair can do
- Colour mixed on the day to match
- CHAS and Constructionline accredited
- No extra charge for your area
Take a look at our full price list or resurfacing vs replacement cost guide.
FAQs for Brownbread Street
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Will there be a smell?
There may be a mild smell during the work that clears as it cures.
What happens once I’ve sent photos?
We review the pictures and send a fixed quote.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before.
How long does re-enamelling take?
Normally one day, with the bath ready the next day. Deeply pitted baths may need a second day.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Can you fix a peeling bath coating?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Can landlords book you?
Yes, often. We can quote for several properties together and work between tenancies.
What we are called out for in Brownbread Street
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Keep an eye out for any of the following:
- A roll-top that’s seen better days
- Chips and rust in more than one place
- Staining under the taps and around the waste
- A coloured bath you want in white
What to look for in a quote
- How to look after the finish
- Whether the colour is mixed to match
- The length of the guarantee and what it covers
- Whether cleaning and preparation are in the price
Also near Brownbread Street
Other services in Brownbread Street
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Landlords, agents and businesses in Brownbread Street
If you manage property in Brownbread Street, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
About Brownbread Street
Brownbread Street is about 6 miles north-west of Bexhill-on-Sea, in East Sussex. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Our repair technicians cover all 289 towns and villages in East Sussex, from the larger towns to small villages. Our jobs stretch from Brownbread Street to London (46 miles away).
Our repair technicians cover all of TN33. Close by, we cover Ashburnham (1 mile east), The Pound (1 mile south-east), Bodle Street Green (2 miles west), Wood's Corner (3 miles north) and Dallington (3 miles north-west). Larger places within reach include Eastbourne (10 miles south-west), Hastings (8 miles east), Bexhill-on-Sea (6 miles south-east), Seaford (15 miles south-west), Hailsham (6 miles south-west) and Crowborough (13 miles north-west).
What’s near Brownbread Street
Typical jobs here are in homes near Parish Church of St Peter, The Ash Tree Inn and Ashburnham Park and the streets around them. For rail, the closest station is Battle station, about 4.9 miles east. Nearby you will also find Amberstone Hospital (5.2 miles south-west) and Old Castle (2.8 miles north-west). Not far away are Senlac Hill.
Honest limits
It helps to know what we can’t do too:
- A bath split right through the body
- Steel that has corroded right through
- An acrylic bath that flexes badly underfoot
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
What affects the price in Brownbread Street
Resurfacing from £350. We do not charge extra for travel to Brownbread Street. The price comes down to:
- How much damage there is
- Where the damage is and how we get to it
- What the surface is made of
- Doing more than one item at once
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Quotes from your pictures
When you take your photos, a few simple things make all the difference:
- What it’s made of, if you know
- Any earlier repairs or coatings
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
What happens on the day
There is not much you need to do on the day. Let us in and show us the room, and we will get on with it. The job generally runs to most of the day, tidy-up included.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Open a window if you can
- Tell us about parking, stairs or access
- Mention any earlier repairs or resurfacing
How to get a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Related advice
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
About our accreditations · Every repair comes with a one-year guarantee.
