East Sussex · England

Bath re-enamelling & resurfacing in Wood's Corner, East Sussex

Problem with your bath in Wood's Corner? We repair it in place, match it on site and back it with a one-year guarantee.

  • Resurfacing from £350
  • Worn patches where water runs and sits
  • A peeling or bubbling previous coating
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Wood's Corner?

Why repair rather than replace?

There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing normally wins. Our bath re-enamelling starts from £350. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Why choose Surface Doctor in Wood's Corner

  • A year’s guarantee on all work
  • Colours mixed by hand to suit your surface
  • We leave the room as we found it
  • Free fixed quotes from pictures

See our prices page and bath cost comparison.

About our bath re-enamelling in Wood's Corner

When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Common call-outs are for a bath in a colour that no longer suits and a dull, rough surface that won’t come clean, across basins & shower trays, cast iron baths and acrylic baths.

The work is covered for a year after we finish. Just call us if there’s a problem and we’ll come back.

Stained basin resurfaced to clean white (before and after)
Area
Wood's Corner (TN21)
County
East Sussex
Cover
A year, on every repair
Quote
From £350. Free, fixed price from pictures
Call
0345 017 0787
Page updated
23 October 2026

How to care for the repair

To keep it looking its best:

  • A quick wipe after use keeps limescale away
  • Clean with a soft cloth and mild detergent
  • Don’t use the bath until it has fully cured
  • Fix dripping taps quickly

Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.

Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.

For landlords and businesses

Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

Covering Wood's Corner

Wood's Corner is about 8 miles north-east of Hailsham, in East Sussex. Across the TN21 area, we come to you. Wood's Corner is one of 289 places in East Sussex where we work. Our nearest city page is London, about 43 miles away.

All of TN21 is covered, from the main roads to the quietest streets. Other places close to Wood's Corner include Dallington (1 mile west), Rushlake Green (2 miles west), Brownbread Street (3 miles south), Punnett's Town (3 miles west) and Ashburnham (3 miles south-east). Larger places within reach include Eastbourne (12 miles south), Hastings (10 miles south-east), Bexhill-on-Sea (8 miles south-east), Hailsham (8 miles south-west), Crowborough (11 miles north-west) and St Leonards (10 miles south-east).

Around Wood's Corner

Locally, our jobs take us to homes close to The Parish Church of St Giles and Dallington Church of England Primary School, among other places. Wood's Corner’s nearest station is Stonegate station, about 5 miles north. Well-known places in the area include Hellingly Hospital (6 miles south-west) and Old Castle (0.7 miles west).

Map of Wood's Corner © OpenStreetMap contributors

Should I try a DIY kit first?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

Wood's Corner: your questions answered

Will the price change on the day?

It’s rare, but if it happens we talk to you first. You decide whether to go ahead.

Which areas do you work in?

Everywhere in the UK, Wood's Corner included. There is no extra charge for travel.

Is there any odour?

A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.

Does the bath have to be removed?

No. It’s re-enamelled where it stands, so nothing else is disturbed.

Is a repair better than a new one?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.

Can you fix a peeling bath coating?

Yes. Removing the old finish takes extra time, which we include in the price.

How long will the bath be out of use?

Most baths are done in a day and can be used the day after. We give you timings with the quote.

How do I book?

Just photos, your postcode and a contact number. On the day, access to the room.

What affects the price in Wood's Corner

Prices start from £350. Quotes are free and the price is fixed. What we look at:

  • How easy the damage is to reach
  • What kind of damage it is
  • The colour and finish to match
  • The material and finish

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

How to get a fixed quote

Photographing the damage takes a minute, and it saves a visit. Try to send:

  • The postcode, so we can plan the visit
  • Good light, ideally daylight, without flash glare
  • Whether it’s been repaired or coated before
  • A clear, close picture of the problem area

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

Repairs by material

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

Common problems we fix in Wood's Corner

In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.

Customers typically contact us about:

  • A dull, rough surface that won’t come clean
  • Wear marks under the taps
  • An old resurfacing that is failing
  • Stains that will not shift

Questions to ask before booking

  • Whether the price covers travel
  • Aftercare advice
  • How the room is protected while they work
  • What prep work is covered

10 questions to ask before booking

The process

We turn up at the time we agreed with you, introduces themselves and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a full day, and the room is left clean and tidy.

  1. We sheet, mask and ventilate the room.
  2. We remove the old silicone and deep clean the bath.
  3. Chips, rust and pitting are repaired.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures.

Before we arrive

  • Clear toiletries, mats and anything else from around the area
  • Mention if the room is upstairs or in a flat
  • Plan for the room to be out of bounds to pets and children

Getting a price

There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.

Get a free quote

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.