Somerset · England
Bath re-enamelling & resurfacing in Bruton, Somerset
Bath re-enamelling in Bruton without the cost of replacing. Get a fixed price from your photos, then we come to you.
- Resurfacing from £350
- A roll-top that is seen better days
- An old resurfacing that’s failing
What we cannot put right
A repair is not right for every job, including:
- Holes rusted through the metal
- Problems we can’t see until an old finish comes off
- A metal bath with a through crack
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
Bath re-enamelling at your home in Bruton
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. We are frequently asked to fix a peeling or bubbling previous coating and an outdated colour you’d like to change, in acrylic baths, basins & shower trays and cast iron baths.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Area
- Bruton (BA10)
- Region
- Somerset
- Warranty
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What we’re called out for in Bruton
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
If you can see any of these, send us a picture:
- A coloured bath you want in white
- A period or roll-top bath worth keeping
- Wear marks under the taps
- A coating lifting around the plughole
Comparing quotes
- Whether there are any call-out or travel charges
- What preparation is included
- How your room will be protected
- Who will actually do the work
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
Our work in Bruton
Bruton is about 10 miles south-west of Frome, in Somerset. Whether you are in the middle of Bruton or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. We work in all 640 towns and villages across Somerset.
Postcode districts we cover here: BA10. Whether you live on High Street, Warren Close and Higher Backway or a nearby road, a technician can come to you. Bruton sits on or near the A359 and B3081, so getting to you is simple. Neighbouring places we cover include Cole (1 mile south-west), Wyke Champflower (1 mile west), Lamyatt (2 miles west), Batcombe (3 miles north) and Westcombe (3 miles north). Further out, we also cover Yeovil (14 miles south-west), Frome (10 miles north-east), Wells (11 miles north-west), Midsomer Norton (12 miles north), Shepton Mallet (7 miles north-west) and Street (13 miles west).
Landmarks near Bruton
Around Bruton, we work in homes near Sexey's School, Bruton Primary School and Church of St Mary and the streets around them. Bruton has its own railway station: Bruton station. Open spaces near Bruton include Lamyatt Beacon.
Landlords, agents and businesses in Bruton
For developers and builders, we fix damage before handover. We can visit several plots in one trip.
Landlords, letting agents and housing providers in Bruton use us as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
Keeping it looking good
After the repair has cured, a few habits help it last:
- Wash away dyes and oils after use
- Dry the bath after use to stop limescale
- Never use suction bath mats
- Respect the curing time we give you
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale can’t build up.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Prices and what affects them
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- How much damage there is
- What kind of damage it is
- Whether old repairs or coatings need taking off
- How many items we do on one visit
Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Quotes from your photos
The better the pictures, the more accurate the price. Here’s what helps:
- Where you are, by postcode
- Details of any past repairs
- What it’s made of, if you know
- A coin beside the damage so we can judge size
If you’re in Bruton and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Nearby places to Bruton
More services for Bruton
The process
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes the best part of a day. If anything looks different from your pictures, we will talk to you before going ahead.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s normally ready the following day.
Getting ready for the visit
- Open a window if you can
- Clear toiletries, mats and anything else from around the area
- Let the surface dry out before the visit
Ask for a price
Send us photos of the damage and a wider shot of the entire item, and tell us you are in Bruton, and we will come back with a fixed quote.
Read more
Common questions in Bruton
Can I add another job to the visit?
Yes, and it’s often cheaper. Just add the extra items to your photos and we’ll quote them together.
Can you do the outside of a roll-top?
Yes. Inside and out if you’d like.
What if the damage is worse than the photos show?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
How do I get a price for bath re-enamelling in Bruton?
Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
What information do you need?
Send pictures through the quote form or call 0345 017 0787.
Can I get a quote without a visit?
In nearly every case. If pictures do not show enough, we’ll ask for another angle.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
About our accreditations · Every repair comes with a one-year guarantee.
