Somerset · England
Bath Re-enamelling for Batcombe homes
Bath re-enamelling in Batcombe without the cost of replacing. Send us pictures for a fixed quote, then we come to you.
- Resurfacing from £350
- Stains that will not shift
- Several chips and rust patches
Bath re-enamelling in Batcombe, done in place
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, with the bath ready to use the following day. Common call-outs are for an old resurfacing that’s failing and a dull, rough surface that won’t come clean, across basins & shower trays, cast iron baths and Victorian roll-tops.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll come back.
- Where
- Batcombe (BA4)
- Area hub
- Somerset
- Cover
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How we price bath re-enamelling
Resurfacing from £350. We give every job a fixed price from pictures. These are the things that affect it:
- Whether we combine several jobs
- Access to the area
- How many areas need work
- What the surface is made of
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Send photos for a quote
When you take your pictures, these tips help us give you a firm price:
- A close-up of the damage, in focus
- Good light, ideally daylight, without flash glare
- Any earlier repairs or coatings
- One picture of the entire bath
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Should you replace it?
A replacement often means several trades over several days. Resurfacing takes one technician and typically a day, with the bath back in use the next day. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Why us?
- No extra charge for your area
- No need to remove anything
- Colour mixed on the day to match
- Generally one visit, start to finish
Read our pricing and resurfacing vs replacement cost guide.
Do you need bath re-enamelling in Batcombe?
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
Get in touch if you’ve noticed:
- Staining under the taps and around the waste
- Thin, worn enamel in places
- A dull, rough surface that will not come clean
- A period or roll-top bath worth keeping
Comparing quotes
- What protection goes down before work starts
- Whether a trained technician does the job
- Aftercare advice
- The length of the guarantee and what it covers
Looking after it afterwards
How the surface is treated afterwards matters:
- Don’t leave bottles, razors or sponges standing on the surface
- Leave the bath for the full curing time before using it
- A dripping tap should be fixed promptly
- Rinse off hair dye, oils and bath bombs immediately
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and don’t leave bottles or razors standing on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
Honest limits
Before you book, it’s worth knowing the limits:
- Plumbing leaks, which need a plumber
- A bath that is rusted through
- A bath split right through the body
Not sure? Send photos and we will give you a straight answer before you book.
Materials we work on in Batcombe
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
How the visit works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, and get on with the job, which usually takes the best part of a day. If anything looks different from your pictures, we’ll talk to you before going ahead.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the following day, the bath is ready.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Keep a parking space free if you can
- Let the surface dry out before the visit
Getting a price
The quickest way to a price is to send two or three photos through our quote form or call us. We will say straight away whether it can be repaired.
Read more
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Our work in Batcombe
Batcombe is about 8 miles south-west of Frome, in Somerset. We visit customers in Batcombe and nearby villages, so you don’t need to take anything anywhere. We cover 640 places across Somerset, from the larger towns to small villages.
Here we cover the BA4 postcode area. That includes homes on Back Lane, Cockpit Lane and Fry's Lane. Other places close to Batcombe include Westcombe (1 mile west), Upton Noble (2 miles east), Stoney Stratton (2 miles west), Chesterblade (2 miles north-west) and Wanstrow (2 miles north-east). Further out, we also cover Frome (8 miles north-east), Wells (10 miles north-west), Midsomer Norton (9 miles north), Shepton Mallet (5 miles north-west), Street (13 miles west) and Glastonbury (12 miles west).
Near you in Batcombe
Typical jobs here are in homes near The Three Horseshoes pub and Church of St Mary the Virgin. Batcombe’s nearest station is Bruton station, roughly 2.7 miles south of the centre. Open spaces near Batcombe include Lamyatt Beacon.
Also near Batcombe
Also in Batcombe
Questions from Batcombe
Is the work guaranteed?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
Will the price change on the day?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
Can you do more than one item on the same visit?
Of course, and it generally saves money. Send pictures of everything together and we will quote them together.
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
How much does bath re-enamelling cost in Batcombe?
Resurfacing from £350. Every job gets a fixed quote from your photos. Send a close-up and a picture of the whole item and your postcode.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
Does re-enamelling smell?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
What information do you need?
Just pictures, your postcode and a contact number. On the day, access to the room.
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
About our accreditations · Every repair comes with a one-year guarantee.
