Dorset · England
Bath Re-enamelling in Bryanston
Damaged bath in Bryanston? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Wear marks under the taps
- A bath that stays dull however much you clean it
Landlords, agents and businesses in Bryanston
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
If you manage property in Bryanston, we will quote for several properties at once. Just send photos for each address and we’ll price them together.
How we handle bath re-enamelling in Bryanston
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Common call-outs are for lots of chips and rust spots and an original cast iron bath that needs restoring, on pressed steel baths, cast iron baths and acrylic baths.
Every repair comes with our one-year guarantee.
- Where
- Bryanston (DT11)
- Area hub
- Dorset
- Warranty
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What affects the price in Bryanston
Resurfacing from £350. We do not charge extra for travel to Bryanston. The price comes down to:
- What the surface is made of
- Access to the area
- Any earlier repairs that need removing first
- Doing more than one item at once
There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed quote
We price nearly every job from pictures. This is what we need:
- A wider photo showing the entire bath
- Any earlier repairs or coatings
- A coin or ruler next to the damage for scale
- The postcode, so we can plan the visit
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed quote back. Quotes are free and you’re under no obligation.
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Repair or replace in Bryanston?
If the bath is sound, re-enamelling is typically much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Prices start from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
What you get with us
- Accredited with CHAS, Constructionline and SafeContractor
- Work done at your home or business
- We leave the room as we found it
- Honest advice, even when it means no job
See our prices page and bath cost comparison.
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
The process
Visits start with a quick look at the job together, so there are no surprises. Next, we cover and mask everything nearby and we start. You can expect it to take the best part of a day, and we will keep you posted as we go.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
Preparing for the visit
- Have a window or extractor fan available
- Plan for the room to be out of bounds to pets and children
- Have somewhere for us to park nearby if possible
Get a quote
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Read more
Nearby places to Bryanston
What else we do in Bryanston
Looking after it afterwards
So the finish stays in good condition for years:
- Get any chip repaired quickly
- Wipe the bath dry after use in hard water areas
- Fix dripping taps quickly
- Store bottles off the bath
A quick rinse and wipe after use helps, especially in hard water areas, so limescale cannot build up.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Bryanston and the surrounding area
Bryanston is about 1 mile west of Blandford Forum, in Dorset. Book a date that suits you, and you’ll know when to expect us, so you are not left waiting in all day. We cover 462 places in Dorset.
Here we cover the DT11 postcode area. Local streets include The Cliff, New Road and Walnut Avenue. Nearby, we also work in Blandford Forum (1 mile east), Blandford St Mary (1 mile south-east), Langton Long Blandford (2 miles east), Stourpaine (2 miles north) and Thornicombe (2 miles south). Further out, we also cover Dorchester (15 miles south-west), Wimborne Minster (10 miles south-east), Verwood (14 miles east), Gillingham (13 miles north), Shaftesbury (10 miles north) and Ferndown (13 miles east).
Around Bryanston
Typical jobs here are in homes near Church of St Martin, The Crown Hotel and Milldown CofE Academy and the streets around them. Nearby too are Bryanston School (0.5 miles north) and The Blandford School (0.6 miles east). Well-known places in the area include Blandford Community Hospital (0.7 miles east) and Blandford Fashion Museum (0.8 miles east). Not far away are Hod Hill.
What a repair can’t fix
Not everything can be repaired, and we would rather say so up front. Repairs will not solve:
- Leaks from fittings rather than the bath
- A poorly supported acrylic bath, until it’s firmed up
- A bath split right through the body
If in doubt, send photos and we will say what we think before you book.
What we work on
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
Bryanston questions
What do you need from me?
Photos of the damage, a picture of the whole bath and your postcode. After that, we just agree a date.
Can you fix a peeling bath coating?
In most cases. The old coating comes off before we resurface it. Mention it when you send pictures.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Can you repair something that is been repaired before?
Generally, yes. Let us know what was used before.
Is there a call-out fee?
There is no separate call-out charge. Your fixed quote includes everything.
Will there be fumes?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
About our accreditations · Every repair comes with a one-year guarantee.
