Isle of Anglesey · Wales
Bath re-enamelling & resurfacing in Bryngwran, Isle of Anglesey
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Bryngwran. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Thin, worn enamel in places
- Staining under the taps and around the waste
What happens on the day
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes the best part of a day. We tidy up before we leave and let you know when you can use it again.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
Getting ready for the visit
- Let us know if it has been repaired before
- Keep children and pets away from the room on the day
- Point us to the nearest place to park
Get a quote
The quickest way to a price is to send two or three pictures using our quote form or ring us. We’ll say straight away whether it can be repaired.
Related advice
How we handle bath re-enamelling in Bryngwran
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. Our repair technicians work on pressed steel baths, basins & shower trays and Victorian roll-tops, and the jobs we see most are brown or grey marks that don’t clean off and a roll-top that’s seen better days.
You get a one-year guarantee, the same in Bryngwran as everywhere else we work.
- Area
- Bryngwran (LL65)
- County
- Isle of Anglesey
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Towns and villages near Bryngwran
Also in Bryngwran
Repair or replace in Bryngwran?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Prices start from £350. Our prices are the same across the UK, so there’s no premium for Bryngwran. What changes the price is the job itself: how much damage, what it’s made of and how many items.
What you get with us
- We’ll tell you if it’s not worth repairing
- CHAS, Constructionline and SafeContractor accredited
- No extra charge for your area
- Technicians who travel to you, UK-wide
Read our prices page and resurfacing vs replacement cost guide.
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Bryngwran and nearby
Bryngwran is about 7 miles south-east of Holyhead, in Isle of Anglesey. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in all 115 towns and villages across Isle of Anglesey. You can also see our page for Liverpool, about 65 miles away.
Here we cover the LL65 postcode area. Whether you live on High Street, Lon Farm Bryngwran and Salem Street or a nearby road, we can come to you. If you’re just outside Bryngwran, we cover Gwalchmai (3 miles east), Llanfaelog (3 miles south), Bryn Du (3 miles south), Gwalchmai Uchaf (3 miles east) and Trewalchmai (3 miles south-east). Within a short drive, we also cover Holyhead (7 miles north-west), Blackbridge (7 miles west), Porth-y-Felin (7 miles north-west), Llangefni (7 miles east), Menai Bridge (13 miles east) and Stryd (7 miles west).
What’s near Bryngwran
We visit homes around Iorwerth Arms and Holy Trinity Church and the streets around them. For rail, the closest station is Rhosneigr station, roughly 2.7 miles south-west. Open spaces near Bryngwran include Valley Wetlands and Bryn-teg.
How to care for the repair
A little care keeps the finish looking good. We recommend:
- Respect the curing time we give you
- Use washing-up liquid and a soft cloth
- Never use suction bath mats
- Do not leave bottles, razors or sponges standing on the surface
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
When we would advise against a repair
Before you book, it’s worth knowing the limits too:
- Problems we cannot see until an old finish comes off
- A metal bath with a through crack
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send photos and we’ll give you a straight answer before you book.
Surfaces we repair
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
Repairs by material
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
For landlords and businesses
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
When to call us in Bryngwran
Many baths we resurface have simply been well used. Underneath, a cast iron or steel bath is typically as strong as ever.
It’s worth getting a quote if you see:
- Chips and rust in more than one place
- Enamel that’s lost its shine and feels rough
- Worn patches where water runs and sits
- Brown or grey marks that don’t clean off
Comparing quotes
- How soon you can use it again
- If travel is included in the price
- How the colour is matched
- A fixed price, and whether VAT is included
Questions from Bryngwran
Do you charge for travel?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Do you cover Bryngwran?
We do. We send a technician to Bryngwran for every job, with no extra charge for travel.
Is there a smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
Do you resurface freestanding baths?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
Can tenants book a repair?
Of course. Ask your landlord first, and we can send them the quote if that helps.
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo with your LL65 postcode.
About our accreditations · Every repair comes with a one-year guarantee.
