Isle of Anglesey · Wales

Bath Resealing in Bryngwran

Bath, shower and sink resealing with new mould-resistant silicone in Bryngwran, carried out at your home and guaranteed for a year.

  • Silicone smeared on tiles
  • Sealant that is split or lifting
  • Damp near the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath resealing in Bryngwran

How we handle bath resealing in Bryngwran

A fresh seal protects your bathroom. Old, split or mouldy sealant lets water get behind the bath or tray, and a new seal stops it. We regularly repair shower trays & enclosures, wet rooms and baths, and people most often call us about water getting behind the bath or tray and missing sealant behind the taps.

You’re covered for a year from the day of the repair. Just call us if there’s a problem and we’ll sort it.

Technician in a mask working on a freestanding roll-top bath
Area
Bryngwran (LL65)
Area hub
Isle of Anglesey
Warranty
12 months on all our work
Quote
Free, fixed price from pictures
Call
0345 017 0787
Last updated
23 October 2026

What happens on the day

We agree an arrival time beforehand, so you are not left guessing. On site, it takes about two hours for a bath in most cases. We leave the room clean and you will know when it can be used.

  1. All the old sealant is cut out and removed.
  2. Next we clean the joint and deal with mould.
  3. We ensure the joint is completely dry.
  4. For a bath, we fill it with water first so the joint is at its widest.
  5. New mould-resistant silicone goes on and is tooled to a neat finish, taps included.

Preparing for the visit

  • Let us know which floor the room is on
  • Avoid using the area for a few hours before we arrive
  • Mention any earlier repairs or resurfacing

How to get a price

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.

Send photos for a quote

Related advice

When to call us in Bryngwran

Sealant does not last forever. Each shower leaves moisture and soap behind, which mould loves, and the joint flexes each time the bath fills.

People generally call us when they notice one of these:

  • Unsealed corners
  • Mould you cannot clean out
  • Silicone smeared on tiles
  • Damp near the bath

What to look for in a quote

  • What happens if they find more damage
  • Whether the price is fixed and includes VAT
  • How the room is protected while they work
  • The length of the guarantee and what it covers

Choosing a repair company

What your bath or shower is made of matters

Shower trays

Trays are sealed with weight on them, so the joint is at its widest.

Baths

We fill the bath before sealing, so the joint is at its widest.

Questions from Bryngwran

Does someone need to be in?

Yes. We need access to the room while we work, at a time we agree with you.

Is a repair better than a new one?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.

Can you reseal over the old silicone?

Never over old. The old sealant is cut out and the joint cleaned and dried.

Can you price it without visiting?

In nearly every case. We only ask to see it in person if the pictures cannot show what we need.

Do you hold any accreditations?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Why does my sealant keep splitting?

Something is moving. If it keeps happening, the support may need fixing.

Can landlords book you?

Yes, often. We can quote for several properties together and work between tenancies.

How long before I can shower?

We will give you the curing time.

Work for landlords and builders

We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll arrange it.

Builders use us to fix snagging damage before handover. We can visit several plots in one trip.

Prices and what affects them

Every quote is fixed and free. What we take into account:

  • Previous DIY repairs that have to come out
  • Whether it’s a chip, crack, burn or wear
  • What the surface is made of
  • How many areas need work

Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

Getting a price from pictures

Two or three clear photos are normally enough. It helps if you send:

  • Daylight if possible, and no flash reflection
  • Something in shot to show the size
  • Whether it’s been repaired or coated before
  • Any details about the material

Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed quote back. There’s no charge for the quote and no obligation.

Our work in Bryngwran

Bryngwran is about 7 miles south-east of Holyhead, in Isle of Anglesey. Jobs in Bryngwran are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Bryngwran is one of 115 towns and villages in Isle of Anglesey where we work. We work right across the region, from Bryngwran to Liverpool (about 65 miles away).

Jobs in LL65 work the same way as everywhere else we cover. Local streets include High Street, Lon Farm Bryngwran and Salem Street, and we cover them all. If you’re just outside Bryngwran, we cover Gwalchmai (3 miles east), Llanfaelog (3 miles south), Bryn Du (3 miles south), Gwalchmai Uchaf (3 miles east) and Trewalchmai (3 miles south-east). We also work in nearby towns such as Holyhead (7 miles north-west), Blackbridge (7 miles west), Porth-y-Felin (7 miles north-west), Llangefni (7 miles east), Menai Bridge (13 miles east) and Stryd (7 miles west).

Local landmarks in Bryngwran

Around Bryngwran, we work in homes near Iorwerth Arms and Holy Trinity Church, among other places. Bryngwran’s nearest station is Rhosneigr station, roughly 2.7 miles south-west of the centre. For a walk, there is Valley Wetlands and Bryn-teg.

Map of Bryngwran © OpenStreetMap contributors

Is resealing worth it?

Resealing is a small job. Leaving split or mouldy sealant lets water get behind the bath or tray, and that damage costs much more to fix. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Why book with us

  • Every repair guaranteed for a year
  • A fixed quote before booking
  • We’ll tell you if it’s not worth repairing
  • We come to you, anywhere in the UK

Take a look at our full price list.

Looking after it afterwards

Most damage we see is avoidable. These habits help:

  • Use the extractor fan
  • Clean the sealant gently and regularly
  • Keep bottles off the joints
  • Let steam out after showers

Keep the room well ventilated, and dry the joints after bathing.

Do not wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.

Should I try a DIY kit first?

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.