Hertfordshire · England
Bath Re-enamelling in Bulbourne
Full bath re-enamelling and resurfacing for homes and businesses in Bulbourne and across Hertfordshire. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A coating lifting around the plughole
- A bath that stays dull however much you clean it
Bath re-enamelling in Bulbourne without replacing anything
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Whether it’s staining under the taps and around the waste and lots of chips and rust spots, we can help.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Location
- Bulbourne (HP23)
- Area hub
- Hertfordshire
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What we do, step by step
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the work takes a full day. Before we leave, we explain how soon it can be used and how to care for it.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s typically ready the next day.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Tell us if there are stairs or a lift
- Plan for the room to be out of bounds to pets and children
How to get a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Related advice
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
What we’re called out for in Bulbourne
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Signs it’s time to call us include:
- A bath that stays dull however much you clean it
- Wear marks under the taps
- Stains that won’t shift
- A coloured bath you want in white
Comparing quotes
- A fixed quote, and whether VAT is included
- What happens if the damage is worse than the photos show
- Who turns up on the day
- Aftercare advice
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it fails, we can still put it right.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Repair or replace in Bulbourne?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Prices start from £350. A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why book with us
- Work done at your home or business
- Typically one visit, start to finish
- Every repair guaranteed for a year
- Nothing taken out or refitted
Read our prices page or guide to resurfacing and replacement costs.
Questions from Bulbourne
How durable is a resurfaced bath?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
Do you work in Bulbourne?
Yes. We cover the whole UK and come to Bulbourne and the rest of Hertfordshire. Send us pictures for a fixed quote, or call 0345 017 0787.
Will the price change on the day?
The price is fixed for what the photos show. If there is more, we will tell you before starting.
Can I get a quote without a visit?
Generally, yes. A close-up and a wider photo are enough to give a fixed quote.
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed quote based on pictures of the damage. Send a close-up and a picture of the entire item and your postcode.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
What information do you need?
Photos of the damage, a photo of the whole bath and your postcode. Then we’ll agree a date.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted before the end of a tenancy.
What a repair can’t fix
Some jobs aren’t right for a repair, for example:
- Steel that has corroded right through
- A poorly supported acrylic bath, until it’s firmed up
- Plumbing leaks, which need a plumber
Not sure? Send pictures and we’ll give you a straight answer before booking.
Surfaces we repair
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
Landlord and trade work in Bulbourne
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
Nearby places to Bulbourne
Other services in Bulbourne
How to care for the repair
Aftercare is simple:
- Do not leave a chip unrepaired
- Wipe the bath dry after use in hard water areas
- Do not use the bath until it has fully cured
- Fix dripping taps quickly
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and don’t leave bottles or razors standing on the surface.
Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.
Bulbourne and the surrounding area
Bulbourne is about 5 miles north-west of Berkhamsted, in Hertfordshire. Anywhere in HP23, we come to you. Bulbourne is one of 381 places in Hertfordshire where we work. Our jobs stretch from Bulbourne to London (about 32 miles away).
We work across HP23. We regularly work on streets such as Bulbourne Yard and Bulbourne Road. Nearby, we also work in Marsworth (1 mile north-west), Startop's End (1 mile west), Tringford (1 mile west), Pitstone (1 mile north) and Wilstone (2 miles west). We also work in nearby towns such as Watford (15 miles south-east), Hemel Hempstead (9 miles south-east), St Albans (14 miles east), Harpenden (13 miles east), Berkhamsted (5 miles south-east) and Rickmansworth (14 miles south-east).
Around Bulbourne
We visit homes around The White Lion pub, Tring School and Grove Road Primary School. For rail, the closest station is Tring station, roughly 1.5 miles south-east of the centre. Other landmarks nearby include Pitstone Green Museum (1.2 miles north). Open spaces near Bulbourne include College Lake nature reserve and Ivinghoe Beacon.
About our accreditations · Every repair comes with a one-year guarantee.
