Hertfordshire · England

Bath Re-enamelling for Rickmansworth homes

Our technicians come to Rickmansworth for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.

  • Resurfacing from £350
  • Stains that won’t shift
  • Wear marks under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Rickmansworth

Work for landlords and builders

Builders use us to fix snagging damage before handover. We can visit several plots in one trip.

Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

Bath re-enamelling in Rickmansworth, done in place

When a bath is structurally fine but worn out on the surface, re-enamelling is typically the most cost-effective option. There is no removal, plumbing or tiling involved. Common call-outs are for enamel that’s lost its shine and feels rough and wear marks under the taps, in cast iron baths, basins & shower trays and Victorian roll-tops.

You are covered for a year from the day of the repair. Just call us if there’s a problem and we will sort it.

Where
Rickmansworth (WD3, WD18)
County
Hertfordshire
Warranty
One year on every repair
Quote
From £350. Free, fixed quote from pictures
Phone
0345 017 0787
Last updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Keeping it looking good

Looking after the surface is easy:

  • Don’t let dyes or oils sit on the finish
  • A dripping tap should be fixed promptly
  • A quick wipe after use keeps limescale away
  • Stick to gentle, non-abrasive cleaners

Use mild, non-abrasive cleaners, don’t use suction bath mats, and don’t leave bottles or razors standing on the surface.

If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.

The process

We turn up when we said we would and checks the damage against your photos first. The floor and nearby surfaces are covered before any work starts. The work itself takes the best part of a day, and the room is left clean and tidy.

  1. First we protect the bathroom and set up ventilation.
  2. We clean and degrease the bath and repair any chips or rust.
  3. The surface is prepared and a bonding primer applied.
  4. Several coats of new finish are sprayed on.
  5. We leave it to cure, and it’s usually ready the next day.

Preparing for the visit

  • Point us to the nearest place to park
  • Have a window or extractor fan available
  • Plan for the room to be out of bounds to pets and children

Ask for a price

If you are in Rickmansworth and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.

Get a free quote

Read more

Where we work around Rickmansworth

Rickmansworth is about 3 miles south-west of Watford, in Hertfordshire. We travel to clients in Rickmansworth, so you don’t need to take anything anywhere. Our repair technicians cover 381 places across Hertfordshire. We work right across the region, from Rickmansworth to London (19 miles away).

Our visits in WD3 and WD18 are booked in the same way as anywhere else. You will find streets such as High Street, Station Road and London Road, all of which we cover. Main roads around Rickmansworth include the A404 and A412, which makes travel easy. Neighbouring places we cover include Batchworth (1 mile south), Chorleywood West (1 mile north-west), Croxley Green (1 mile north-east), Mill End (1 mile west) and Woodcock Hill (1 mile south). Larger places within reach include Watford (3 miles north-east), Hemel Hempstead (8 miles north), St Albans (10 miles north-east), Harpenden (13 miles north), Hatfield (13 miles north-east) and Borehamwood (8 miles east).

What’s near Rickmansworth

Locally, our jobs take us to homes close to Rickmansworth Park Junior Mixed and Infant School, The Coach And Horses Public House and Church of St Mary, among other places. Other local landmarks include Saint Joan of Arc Catholic School (within half a mile south-east) and Rickmansworth Park (under half a mile north-west). Rickmansworth has its own railway station: Rickmansworth station. Other landmarks nearby include Bishops Wood Hospital (1.9 miles south-east) and Chiltern Open Air Museum (3.2 miles west). Not far away are Chorleywood Common and Tumbling Bay.

  • Parks and local facilities nearby include Maple Cross and Mill End (1.2 miles west)
Map of Rickmansworth © OpenStreetMap contributors

How we price bath re-enamelling

Resurfacing from £350. Prices are worked out job by job. The main factors are:

  • How many items we do on one visit
  • How hard the colour is to match
  • How much damage there is
  • The material and finish

There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.

Getting a price from pictures

It only takes a minute to photograph the damage. Please include:

  • Natural light rather than flash
  • Any earlier repairs or coatings
  • A coin or ruler next to the damage for scale
  • What it’s made of, if you know

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.

DIY repairs versus a professional job

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

Repairing versus replacing in Rickmansworth

A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the next day. Resurfacing from £350, with every job priced individually. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your pictures, so you know the cost before booking.

Why book with us

  • No extra charge for your area
  • Everything repaired in place
  • Rooms protected and left tidy
  • Free fixed quotes from pictures

See our full price list or guide to resurfacing and replacement costs.

Common problems we fix in Rickmansworth

A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.

The most common problems we’re called about are:

  • Enamel that’s lost its shine and feels rough
  • Stains that won’t shift
  • A bath in a colour that no longer suits
  • Thin, worn enamel in places

Before you book anyone

  • Whether cleaning and preparation are in the price
  • What aftercare is recommended
  • What happens if they find more damage
  • How the room is protected while they work

How to compare quotes

Common questions in Rickmansworth

Will you leave a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Do you work in Rickmansworth?

Yes, we do. Repair technicians travel to Rickmansworth from across the region, and the price is the same as everywhere else.

How do I book?

Send pictures through the quote form or call 0345 017 0787.

Do I have to be there?

Yes. We need access to the room while we work, at a time that suits you.

Is repairing better than replacing?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.

Someone resurfaced my bath and it’s peeling. Can you help?

Yes. Stripping the old coating adds time, so it’s reflected in the quote.

Is my repair covered?

Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.

Will there be a smell?

Some materials have a smell while they’re applied. It fades as everything cures.

Repairs by material

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

Acrylic

Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.