Bristol · England
Bath Re-enamelling in Bullock's Park
Bath re-enamelling for Bullock's Park, without a refit. Get a fixed quote from your pictures, then book a visit.
- Resurfacing from £350
- Thin, worn enamel in places
- Brown or grey marks that don’t clean off
Common questions in Bullock's Park
How long does re-enamelling take?
Typically one day, with the bath ready the next day. A badly pitted bath can need a second day.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Can you quote from photos?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Will there be fumes?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
How quickly can you book me in?
We will give you dates with your quote. Tell us if you need it done quickly.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Bath re-enamelling in Bullock's Park without replacing anything
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. We work on acrylic baths, cast iron baths and Victorian roll-tops, and the jobs we see most are a coating lifting around the plughole and thin, worn enamel in places.
Big or small, it’s backed by a one-year guarantee.
- Area
- Bullock's Park (BS1, BS8, BS2)
- Region
- Bristol
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Nearby places to Bullock's Park
What else we do in Bullock's Park
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Stick to gentle, non-abrasive cleaners
- Keep toiletries on a shelf rather than in the bath
- Don’t leave a chip unrepaired
- Wipe the bath dry after use in hard water areas
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
What bath re-enamelling costs
Prices start from £350. We do not charge extra for travel to Bullock's Park. The price comes down to:
- What kind of damage it is
- Any earlier repairs that need removing first
- Doing more than one item at once
- The colour and finish to match
A repair generally costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
How to get a fixed quote
You can typically get a fixed quote without us visiting. To make it quick:
- What it’s made of, if you know
- Any earlier repairs or coatings
- Your postcode, so we can check dates
- A clear, close picture of the problem area
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Repair or replace: which is better?
A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and days without a bathroom. Resurfacing renews the whole surface without moving it. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Why us?
- Straight answers about what a repair can do
- A year’s guarantee on all work
- Colour-matched on site
- Rooms protected and left tidy
Take a look at our prices page and guide to resurfacing and replacement costs.
Bullock's Park and the surrounding area
Bullock's Park is about 1 mile south-west of Bristol, in Bristol. We travel to homes and businesses in Bullock's Park, so there’s no workshop to go to. We cover 89 places in Bristol. You can also see our page for Birmingham, about 77 miles away.
Here we cover the BS1, BS8 and BS2 postcode area. Whether you live on Mark Lane, Pipe Lane and Frog Lane or anywhere nearby, we can come to you. You’ll find Bullock's Park on the A38, which makes it straightforward to reach. Neighbouring places we cover include Canon's Marsh (1 mile south-east), Spike Island (1 mile south-west), Southville (1 mile south), Hotwells (1 mile west) and Cotham (1 mile north). Further out, we also cover Soundwell (4 miles east), Mayfield Park (4 miles north-east), Horfield (3 miles north), Henleaze (3 miles north), St George (3 miles east) and Hartcliffe (3 miles south).
Around Bullock's Park
Our customers here include homes close to North Bristol Post 16 Centre, Mauretania Public House and Bristol Cathedral Choir School. You will also find Brandon Hill Park (less than half a mile west), Cathedral Primary School (under half a mile south) and St George's Church (less than half a mile north-west). For rail, the closest station is Clifton Down station, roughly 0.8 miles north-west. Well-known places in the area include Avon (0.9 miles east) and The Galleries (0.6 miles east). Open spaces near Bullock's Park include Brandon Hill and Tarn Lake.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
How it works
Arrival times are agreed in advance, so you’re not left guessing. Once we’re there, the work takes a full day in most cases. The room is left tidy.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Let us know about parking or access
- Open a window if you can
- Let us know if it has been repaired before
How to get a price
Most customers in Bullock's Park get their price from pictures. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Related advice
Repairs by material
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Landlords, agents and businesses in Bullock's Park
For anyone letting property in or around Bullock's Park, we can repair and quote for several addresses together. Just send pictures for each address and we’ll come back with a combined price.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
What we cannot put right
In fairness, some problems need a different fix:
- Holes rusted through the metal
- A bath split right through the body
- Leaks from fittings rather than the bath
Not sure? Send photos and we’ll give you a straight answer before booking.
What we work on
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
About our accreditations · Every repair comes with a one-year guarantee.
