Bristol · England
Bath Re-enamelling in St George
Full bath re-enamelling and resurfacing at your home in St George, with a one-year guarantee on every repair.
- Resurfacing from £350
- Staining under the taps and around the waste
- Wear marks under the taps
What happens on the day
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Plan for the best part of a day. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Let us know which floor the room is on
- Tell us about any previous repairs or coatings
Get a quote
Email us photos of the damage and a wider shot of the entire item, and tell us you are in St George, and we’ll come back with a fixed quote.
Advice
Bath re-enamelling in St George without replacing anything
If your bath is sound but looks tired, re-enamelling is generally the most cost-effective option. It avoids removal, plumbing and re-tiling. Typical jobs include worn patches where water runs and sits and a period or roll-top bath worth keeping, in Victorian roll-tops, pressed steel baths and basins & shower trays.
You get a one-year guarantee, the same in St George as everywhere else we work.
- Where
- St George (BS5, BS4, BS15)
- County
- Bristol
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
Looking after the surface is easy:
- Do not leave bottles, razors or sponges standing on the surface
- Do not let dyes or oils sit on the finish
- Have chips seen to early
- Don’t use the bath until it has fully cured
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
How we price bath re-enamelling
Resurfacing from £350. We don’t charge extra for travel to St George. The price depends on:
- Whether we combine several jobs
- Unusual colours or finishes
- The size and number of damaged areas
- Any earlier repairs that need removing first
A repair is priced on what needs doing, not where you live. The full price is agreed before booking.
Quotes from your pictures
Two or three clear photos are generally enough. It helps if you send:
- Your postcode, so we can check dates
- Whether it’s been repaired or coated before
- Natural light rather than flash
- A clear, close picture of the problem area
To get a price, send a couple of pictures through our quote form or ring us. We’ll say immediately if a repair is the right fix.
Should you replace it?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why St George clients choose us
- Colours mixed by hand to suit your surface
- Everything repaired in place
- Same prices wherever you are
- Most jobs done in one visit
Read our pricing or bath cost comparison.
Your questions about bath re-enamelling in St George
Do you cover St George?
Yes. We work across the UK and come to St George and the rest of Bristol. Send pictures and we’ll quote, or call 0345 017 0787.
Which areas do you work in?
We work UK-wide. Prices do not change with location.
How do I book?
Photos of the damage, a photo of the entire bath and your postcode. After that, we just agree a date.
How do I get a price for bath re-enamelling in St George?
Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Will there be fumes?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Do I need to be at home?
Someone needs to let us in and show us the job. You do not need to watch us work.
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
We’re used to working with agents and managing companies. Send the address, pictures and access details and we’ll handle the rest.
Common problems we fix in St George
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
The most common problems we are called about are:
- Chips and rust in more than one place
- An original cast iron bath that needs restoring
- Thin, worn enamel in places
- An old resurfacing that is failing
Questions to ask before you book
- How long the guarantee is and what it covers
- What happens if the damage is worse than the pictures show
- How long it needs to cure
- Aftercare advice
When a repair is not the answer
We’d rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Plumbing leaks, which need a plumber
- A poorly supported acrylic bath, until it’s firmed up
- Anything hidden under an old coating, until we remove it
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
St George and the surrounding area
St George is about 2 miles west of Kingswood, in Bristol. Book a date that suits you, and you will know when to expect us, so you are not left waiting in all day. We cover all 89 towns and villages across Bristol. You can also see our page for Birmingham, about 75 miles away.
Our repair technicians cover all of the BS5, BS4 and BS15 postcode area and the streets around it. That includes homes on The Avenue, Glebe Road and Wicket Lane and the roads around them. Being close to the A431, St George is easy for our repair technicians to reach. We also cover the places around St George: Crew's Hole (1 mile west), Whiteway (1 mile north-east), Crofts End (1 mile north), Burchells Green (1 mile north-east) and Whitehall (1 mile west). Further out, we also cover Bedminster (3 miles south-west), Cotham (3 miles west), Canon's Marsh (3 miles west), Southville (3 miles west), The Chessels (3 miles south-west) and Bullock's Park (3 miles west).
Local landmarks in St George
Locally, our jobs take us to homes close to Summerhill Infant School, Bristol Brunel Academy and Three Crowns pub and the streets around them. Other local landmarks include Church of St Aidan (0.5 miles south-east) and Troopers Hill (less than half a mile south-east). St George’s nearest station is Lawrence Hill station, roughly 1.1 miles west. Well-known places in the area include Cossham Memorial Hospital (1.2 miles north-east) and Barton Regis Rural District (1.2 miles north-west). For a walk, there’s Lodge Hill.
Repairs by material
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
Towns and villages near St George
More services for St George
About our accreditations · Every repair comes with a one-year guarantee.
