Surrey · England
Bath Re-enamelling in Bunce Common
Damaged bath in Bunce Common? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Stains that won’t shift
- An outdated colour you’d like to change
Your questions about bath re-enamelling in Bunce Common
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before.
When can you do it?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
What do you need from me?
Send pictures through the quote form or call 0345 017 0787.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Do you cover Bunce Common?
We do. Repair technicians travel to Bunce Common from across the region, with no extra charge for travel.
What if the damage is worse than the pictures show?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
About our bath re-enamelling in Bunce Common
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. Our technicians work on basins & shower trays, cast iron baths and pressed steel baths, and people most frequently call us about chips and rust in more than one place and an original cast iron bath that needs restoring.
Big or small, you get the same one-year guarantee in Bunce Common and across Surrey.
- Where
- Bunce Common (RH2, RH3)
- Area hub
- Surrey
- Guarantee
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Also near Bunce Common
What else we do in Bunce Common
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
How we price bath re-enamelling
Prices start from £350. There is no area surcharge for Bunce Common. The price reflects:
- The material
- Any earlier repairs that need removing first
- Unusual colours or finishes
- How many items we do on one visit
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your photos
Phone photos are fine, there is no need for anything special. Ensure they show:
- A wider photo showing the whole bath
- One sharp close-up of the damage
- Where you are, by postcode
- Details of any past repairs
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them to us. You will get a fixed price, not an estimate.
Signs you need bath re-enamelling in Bunce Common
Many baths we resurface have simply been well used, with nothing wrong except the surface. Underneath, a cast iron or steel bath is typically as strong as ever.
Common reasons people in Bunce Common contact us are:
- Staining under the taps and around the waste
- A bath that stays dull however much you clean it
- Chips and rust in more than one place
- A coating lifting around the plughole
Comparing quotes
- The length of the guarantee and what it covers
- Aftercare advice
- What happens if the damage is worse than the pictures show
- If travel is included in the price
How to care for the repair
To keep it looking its best:
- Use washing-up liquid and a soft cloth
- Wash away dyes and oils after use
- Don’t leave bottles, razors or sponges standing on the surface
- Fix dripping taps quickly
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
When we’d advise against a repair
A few problems are outside what a surface repair can do:
- Leaking taps or wastes (a plumber’s job)
- Acrylic that moves when you stand in it
- A cast iron or steel bath that’s cracked right through
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
Bunce Common and nearby
Bunce Common is about 3 miles south-east of Dorking, in Surrey. Book a date that suits you, and you’ll know when to expect us, so you’re not left waiting in all day. Our technicians cover all 395 towns and villages across Surrey. Our nearest city page is London, about 22 miles away.
All of RH2 and RH3 is within our area, from the main roads to the quietest streets. Jobs here include addresses on Gadbrook Road, Leigh Road and Shellwood Road. Neighbouring places we cover include Dawesgreen (1 mile east), Strood Green (1 mile north), Leigh (1 mile east), Brockham (2 miles north) and Betchworth (2 miles north). We also work in nearby towns such as Guildford (13 miles west), Woking (15 miles north-west), Epsom (9 miles north), Horley (5 miles south-east), Redhill (5 miles north-east) and Ewell (10 miles north).
Near you in Bunce Common
Typical jobs here are in homes near Inholms Clay Pit, Church of St Bartholomew and The Seven Stars Public House, among other places. The closest station to Bunce Common is Betchworth station, about 2.7 miles north. Further afield, we also cover the area around East Surrey Hospital (4.9 miles east) and Reigate Priory Museum (3.5 miles north-east). The countryside around Bunce Common includes Reigate Heath and Box Hill.
The process
Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes a full day, and we leave the room as we found it.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the day after.
How to prepare
- Keep children and pets away from the room on the day
- Let the surface dry out before the visit
- Let us know about parking or access
How to get a price
To get a price, send a couple of photos through our quote form or call us. We will say right away if a repair is the right fix.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
