Oxfordshire · England
Bath re-enamelling & resurfacing in Burcot, Oxfordshire
We travel to Burcot for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Lots of chips and rust spots
- Worn patches where water runs and sits
How to look after the repair
Once the work has cured, treat it gently:
- Leave the bath for the full curing time before using it
- Don’t leave a chip unrepaired
- Keep toiletries on a shelf rather than in the bath
- Wash away dyes and oils after use
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further.
About our bath re-enamelling in Burcot
Most baths are re-enamelled in a day. Taps, tiles, panels and plumbing all stay in place. We regularly repair Victorian roll-tops, pressed steel baths and acrylic baths, and common reasons people get in touch are a coating lifting around the plughole and several chips and rust patches.
A one-year guarantee comes as standard, so you are not left on your own once we’ve gone.
- Location
- Burcot (OX14)
- Region
- Oxfordshire
- Guarantee
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
When a repair is not the answer
Before you book, it’s worth knowing the limits too:
- A poorly supported acrylic bath, until it’s firmed up
- A bath split right through the body
- Problems we cannot see until an old finish comes off
Not sure? Send photos and we will give you a straight answer before you book.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
What we are called out for in Burcot
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
People generally call us after spotting one of these:
- Wear marks under the taps
- A roll-top that’s seen better days
- An old resurfacing that is failing
- Stains that won’t shift
Questions to ask before you book
- How to look after the finish
- What prep work is covered
- When it can be used again
- How your room will be protected
Should you replace it?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Our bath re-enamelling starts from £350. Compared with replacing, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why Burcot clients choose us
- Work done at your home or business
- A year’s guarantee on all work
- CHAS, Constructionline and SafeContractor accredited
- Colour-matched on site
Take a look at our full price list and guide to resurfacing and replacement costs.
More services for Burcot
What bath re-enamelling costs
Prices start from £350. We price every job individually. What matters most is:
- Where the damage is and how we get to it
- Whether old repairs or coatings need taking off
- The colour and finish to match
- Whether we combine several jobs
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Getting a price from photos
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Where you are, by postcode
- The material, if you know it
- A clear, close picture of the problem area
- Natural light rather than flash
Upload photos of the damage and a wider shot of the entire item, with your OX14 postcode, and we’ll come back with a fixed quote.
Repairs by material
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot.
About Burcot
Burcot is about 4 miles north-east of Didcot, in Oxfordshire. Jobs in Burcot are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Burcot is one of 443 places in Oxfordshire where we work. We work right across the region, from Burcot to London (about 48 miles away).
Here we cover the OX14 postcode area. From Linnet Close and Abingdon Road or anywhere nearby, we can come to you. We also cover the places around Burcot: Berinsfield (1 mile north-east), Dorchester (1 mile south-east), Little Wittenham (2 miles south), Drayton St Leonard (2 miles east) and Marsh Baldon (2 miles north). Larger places within reach include Oxford (7 miles north), Didcot (4 miles south-west), Abingdon-on-Thames (4 miles west), Thame (11 miles north-east), Wantage (11 miles south-west) and Henley-on-Thames (15 miles south-east).
Around Burcot
In Burcot, that means homes near The Chequers at Burcot pub, Abbey Woods Academy and Saint Mary and Saint Berin and the streets around them. For rail, the closest station is Culham station, roughly 2.4 miles west. Well-known places in the area include Aston Martin Heritage Trust Museum (1.9 miles east) and Brightwell Castle (3.3 miles south). Open spaces near Burcot include Wittenham Clumps and Wells Farm.
What we do, step by step
You don’t need to empty the room beforehand. Everything we use comes in the van with us, put protection down and get going once we have agreed what we are doing. Most jobs take a full day, and you’re welcome to carry on with your day while we work.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Have somewhere for us to park nearby if possible
- Open a window if you can
- Let us know if it has been repaired before
Getting a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Read more
Work for landlords and builders
For anyone letting property in or around Burcot, we can repair and quote for several addresses together. Just send pictures for each address and we will price them together.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Burcot questions
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Can you repair something that is been repaired before?
Yes, we often do. Removing the old work can add time, and that is in the quote.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
What does bath re-enamelling cost?
Resurfacing from £350. We give a fixed quote from your pictures. Send a close-up and a picture of the whole item with your OX14 postcode.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
How long does re-enamelling last?
Look after it and it lasts. Gentle cleaning, no suction mats.
About our accreditations · Every repair comes with a one-year guarantee.
