Rochdale · England
Bath Re-enamelling in Burnedge
Full bath re-enamelling and resurfacing at your home in Burnedge, with a one-year guarantee on every repair.
- Resurfacing from £350
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
Should you replace it?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
What you get with us
- A year’s guarantee on all work
- Colour-matched on site
- Free fixed quotes from pictures
- Repair technicians who travel to you, UK-wide
Read our pricing and guide to resurfacing and replacement costs.
Bath re-enamelling in Burnedge without replacing anything
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. We regularly repair Victorian roll-tops, pressed steel baths and acrylic baths, and common reasons people get in touch are chips and rust in more than one place and enamel that’s lost its shine and feels rough.
All our work comes with our one-year guarantee, wherever you are in Rochdale.
- Where
- Burnedge (OL16)
- County
- Rochdale
- Guarantee
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
How it works
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes a full day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s typically ready the following day.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Point us to the nearest place to park
- Mention if the room is upstairs or in a flat
Ask for a price
The quickest way to a price is to send a couple of photos through our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Related advice
What we cannot put right
Honesty matters more than a booking, so here’s what a repair won’t do:
- A bath that is rusted through
- Leaks from fittings rather than the bath
- Problems we cannot see until an old finish comes off
Send us pictures and we will tell you honestly.
Surfaces we repair
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
How to care for the repair
Most damage we see is avoidable. A few tips:
- Respect the curing time we give you
- A dripping tap should be fixed promptly
- Do not leave a chip unrepaired
- Avoid suction-cup mats
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- How much damage there is
- Whether we combine several jobs
- The material and finish
- What kind of damage it is
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Send pictures for a quote
A couple of clear pictures is all it takes. Try to include:
- One picture of the whole bath
- Any details about the material
- A coin or ruler next to the damage for scale
- One sharp close-up of the damage
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them over. You’ll get a fixed price, not an estimate.
Burnedge questions
How long does re-enamelling last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Is my repair covered?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Do you need to take the bath out?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Is there any odour?
Expect a mild smell while we are working.
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
Can you redo someone else’s repair?
In most cases. We remove the old repair before doing a new one.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Places near Burnedge
More services for Burnedge
Landlords, agents and businesses in Burnedge
Landlords, letting agents and housing providers in Burnedge use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
For anyone letting property in or around Burnedge, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.
Where we work around Burnedge
Burnedge is about 1 mile north-west of Shaw, in Rochdale. Whether you are in the middle of Burnedge or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Burnedge is one of 46 towns and villages in Rochdale where we work. We work right across the region, from Burnedge to Manchester (9 miles away).
Our visits in OL16 are booked in the same way as anywhere else. We regularly work on streets such as Rochdale Road and Broad Lane. We also travel to Thornham (1 mile south-west), Summit (1 mile south-west), High Crompton (1 mile south-east), Low Crompton (1 mile south) and Balderstone (1 mile north-west). Larger places within reach include Middleton (4 miles south-west), Higher Blackley (6 miles south-west), Heywood (4 miles west), Littleborough (4 miles north), Langley (4 miles south-west) and Tonge (4 miles south-west).
Landmarks near Burnedge
Our customers here include homes close to Spring Inn, St Cuthbert's RC High School and Thornham St James CofE Primary School and the streets around them. Other local landmarks include Balderstone Technology College (1.3 miles north-west) and St James (0.6 miles south-west). The closest station to Burnedge is Rochdale station, roughly 1.8 miles north-west of the centre. Well-known places in the area include Butterworth (1.6 miles north-east) and Ellenroad Ring Mill Engine (1 mile north-east). The countryside around Burnedge includes Tandle Hill.
About our accreditations · Every repair comes with a one-year guarantee.
