East Riding of Yorkshire · England
Bath Re-enamelling in Burton Fleming
Bath re-enamelling across Burton Fleming and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- A bath in a colour that no longer suits
- An old resurfacing that is failing
DIY repairs versus a professional job
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
Bath re-enamelling at your home in Burton Fleming
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. We work on cast iron baths, pressed steel baths and basins & shower trays, and common reasons people contact us are a peeling or bubbling previous coating and a coloured bath you want in white.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Area
- Burton Fleming (YO25)
- County
- East Riding of Yorkshire
- Warranty
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What happens on the day
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes the best part of a day. If anything looks different from your pictures, we’ll talk to you before going ahead.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Open a window if you can
- Keep children and pets away from the room on the day
- Clear the area around the damage
How to get a price
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Read more
Also near Burton Fleming
Also in Burton Fleming
What bath re-enamelling costs
Resurfacing from £350. You will not pay by the hour. The price is based on:
- Unusual colours or finishes
- The type of damage
- How much damage there is
- How many items we do on one visit
Set against the cost of replacement, repairing normally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Getting a price from photos
We price nearly every job from photos. This is what to send:
- A wider photo showing the whole bath
- A clear, close picture of the problem area
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
To get a price, send two or three photos using our quote form or ring us. We’ll say straight away if a repair is the right fix.
Burton Fleming and the surrounding area
Burton Fleming is about 7 miles north-west of Bridlington, in East Riding of Yorkshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so there is no waiting around. We cover 299 places across East Riding of Yorkshire. Our nearest city page is Leeds, about 54 miles away.
Our visits in YO25 work the same way as everywhere else we cover. From Church Farm Court, Front Street and Milsons Lane or a nearby road, a technician can come to you. Close by, we cover Wold Newton (2 miles west), Thwing (2 miles south-west), Rudston (3 miles south), Grindale (3 miles east) and Hunmanby (3 miles north). Further out, we also cover Bridlington (7 miles south-east), Driffield (10 miles south-west), Hilderthorpe (7 miles south-east), Flamborough (9 miles east), Nafferton (8 miles south) and Hutton Cranswick (13 miles south).
What’s near Burton Fleming
In Burton Fleming, that means homes near Church of St Cuthbert. The closest station to Burton Fleming is Hunmanby station, roughly 3 miles north-east of the centre.
Why repair rather than replace?
Replacing a bath typically involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. The price reflects the work involved, not your postcode. The full price is agreed before you book.
What you get with us
- Nothing taken out or refitted
- Work done at your home or business
- Same prices wherever you are
- A fixed quote before booking
Read our prices page or bath cost comparison.
Do you need bath re-enamelling in Burton Fleming?
Often the bath has just had decades of use, with nothing wrong except the surface. The body of the bath is generally perfectly sound.
You may need us if you’ve spotted any of these:
- Several chips and rust patches
- Worn patches where water runs and sits
- Enamel that is lost its shine and feels rough
- An outdated colour you’d like to change
What your quote should include
- How long the guarantee is and what it covers
- What preparation is included
- If travel is included in the price
- What happens if they find more damage
When a repair isn’t the answer
To be straight with you, some problems need a different fix:
- Leaks from fittings rather than the bath
- A poorly supported acrylic bath, until it’s firmed up
- A bath that’s rusted through
Send us pictures and we’ll tell you honestly.
What we work on
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
Aftercare tips
To keep it looking its best:
- Don’t use the bath until it has fully cured
- Get any chip repaired quickly
- Store bottles off the bath
- Don’t let dyes or oils sit on the finish
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
Burton Fleming questions
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Do you work in Burton Fleming?
Yes, we do. We send a technician to Burton Fleming for every job, and the price is the same as everywhere else.
How do I get a price for bath re-enamelling in Burton Fleming?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you change the colour of my bath?
Yes, most people go for white. Mention the colour you want when you send pictures.
How quickly can you book me in?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
Is my repair covered?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Can landlords book you?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
About our accreditations · Every repair comes with a one-year guarantee.
