North Yorkshire · England
Bath Re-enamelling in Hunmanby
Bath re-enamelling in and around Hunmanby: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A coloured bath you want in white
- Brown or grey marks that don’t clean off
Bath re-enamelling in Hunmanby without replacing anything
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, so we don’t cut corners on it. Whether it’s a bath in a colour that no longer suits and brown or grey marks that don’t clean off, we can usually put it right, on Victorian roll-tops, cast iron baths and basins & shower trays alike.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Hunmanby (YO14)
- Area hub
- North Yorkshire
- Guarantee
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Where we work around Hunmanby
Hunmanby is about 8 miles south-east of Scarborough, in North Yorkshire. Clients in Hunmanby get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. We work in 626 places in North Yorkshire. We work right across the region, from Hunmanby to Leeds (about 56 miles away).
Every address in YO14 is covered. Streets in the area include Fountayne Road, Stonegate and Hungate Lane, all of which we cover. Other places close to Hunmanby include Primrose Valley (1 mile east), Muston (1 mile north), Hunmanby Gap (2 miles east), Reighton (2 miles south-east) and Filey (2 miles north-east). Further out, we also cover Scarborough (8 miles north-west), Falsgrave (8 miles north-west), Northstead (9 miles north-west), Newby (9 miles north-west), Scalby (10 miles north-west) and Throxenby (9 miles north-west).
Landmarks near Hunmanby
We visit homes around Church of All Saints, Ebor Academy Filey and Horseshoe Inn. The nearest railway station is Hunmanby station, about 0.5 miles south of the centre. Other landmarks nearby include Scarborough Fair Collection (3.9 miles north).
Nearby places to Hunmanby
More services for Hunmanby
How the visit works
The work is clean and fairly quiet, so you can stay at home while we are there. Protection goes down first, then the work takes the best part of a day. At the end we talk you through how soon it can be used and how to care for it.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
Preparing for the visit
- Keep a parking space free if you can
- Clear toiletries, mats and anything else from around the area
- Tell us if there are stairs or a lift
Ask for a price
For a price in Hunmanby, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
Prices and what affects them
Resurfacing from £350. You will know the full cost before you book. We take into account:
- How many areas need work
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
- Where the damage is and how we get to it
We charge the same wherever you are, so there is no premium for Hunmanby. The job itself decides the price: the material, the amount of damage and how many items.
Quotes from your pictures
You can typically get a fixed price without us visiting. To help us price it:
- What it’s made of, if you know
- A coin or ruler next to the damage for scale
- Your postcode, so we can check dates
- Details of any past repairs
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Why repair rather than replace?
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why us?
- One visit for most repairs
- Everything repaired in place
- Honest advice, even when it means no job
- Colour mixed on the day to match
Read our prices page and guide to resurfacing and replacement costs.
Can I fix it myself?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Landlord and trade work in Hunmanby
Landlords, letting agents and housing providers in Hunmanby use us as well as householders. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
When a repair is not the answer
We won’t take on work that won’t last, so these are the limits:
- A metal bath with a through crack
- Problems we can’t see until an old finish comes off
- Leaks from fittings rather than the bath
Not sure? Send photos and we’ll give you a straight answer before you book.
What we work on
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
Common problems we fix in Hunmanby
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
Typical reasons for a call-out include:
- Wear marks under the taps
- A coating lifting around the plughole
- An original cast iron bath that needs restoring
- A bath that stays dull however much you clean it
What your quote should include
- Whether cleaning and preparation are in the price
- Whether a trained technician does the job
- What protection goes down before work starts
- Whether the colour is mixed to match
FAQs for Hunmanby
Is there a smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Is there a call-out fee?
We do not add a call-out fee. Your fixed price includes everything.
Is there a guarantee?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
How much does bath re-enamelling cost in Hunmanby?
Prices start from £350. Because every job differs, we price from pictures. You’ll get a fixed figure before you book.
How long will the bath be out of use?
One day for most baths, ready the next day. We will confirm timings when we quote.
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
About our accreditations · Every repair comes with a one-year guarantee.
