Gwynedd · Wales
Bath Re-enamelling for Caeathro homes
Full bath re-enamelling and resurfacing in Caeathro, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- Thin, worn enamel in places
Bath re-enamelling in Caeathro, done in place
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. We regularly repair cast iron baths, pressed steel baths and acrylic baths, and the jobs we see most are a roll-top that’s seen better days and a coating lifting around the plughole.
Whatever the size of the job, it’s backed by a one-year guarantee in Caeathro and across Gwynedd.
- Where
- Caeathro (LL55)
- Area hub
- Gwynedd
- Warranty
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
How to look after the repair
To keep it looking its best for years:
- Do not leave bottles, razors or sponges standing on the surface
- Dry the bath after use to stop limescale
- Use washing-up liquid and a soft cloth
- Do not leave a chip unrepaired
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
How it works
We begin by going over the job with you, so you know exactly what we’re doing. Then the area is sheeted and masked and the work begins. It normally takes a full day, and we will tell you if anything changes.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
Before we arrive
- Clear the area around the damage
- Tell us about any previous repairs or coatings
- Mention any parking restrictions or tricky access
Ask for a price
Email us a photo of the damage and one of the entire item, and tell us you are in Caeathro, and we will come back with a fixed quote.
Advice
Why repair rather than replace?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, normally one day, and the bath is usable the day after. Prices start from £350. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Why Caeathro clients choose us
- Technicians who travel to you, UK-wide
- CHAS, Constructionline and SafeContractor accredited
- Honest advice, even when it means no job
- We leave the room as we found it
Read our prices page and bath cost comparison.
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
FAQs for Caeathro
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
What happens once I’ve sent photos?
We look at the photos and reply with a fixed quote and some dates. If anything’s unclear, we’ll ask for another photo.
Will there be a smell?
There may be a mild smell during the work that clears as it cures.
Is the work guaranteed?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
What information do you need?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Towns and villages near Caeathro
More services for Caeathro
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
About Caeathro
Caeathro is about 8 miles south-west of Bangor, in Gwynedd. We travel to customers in Caeathro and nearby villages, so there is no workshop to go to. Our technicians cover all 165 towns and villages in Gwynedd, from the larger towns to small villages. You can also see our page for Liverpool, about 58 miles away.
Here we cover the LL55 postcode area. Whether you live on Erw Wen, Stad Glyndwr and Caeathro Bach or anywhere nearby, we can come to you. Neighbouring places we cover include Llanbeblig (1 mile west), Caernarfon (1 mile north-west), Bontnewydd (1 mile south-west), Waterloo Port (2 miles north-west) and Waunfawr (2 miles south-east). Within a short drive, we also cover Bangor (8 miles north-east), Bethesda (8 miles north-east), Hirael (9 miles north-east), Upper Bangor (8 miles north-east), Glanadda (7 miles north-east) and Gerlan (9 miles east).
What’s near Caeathro
Typical jobs here are in homes near Stables/Coach House at Bryn Eglwys, Caernarvon National School and St Peblig's Church and the streets around them. Further afield, we also cover the area around Twthill (1.4 miles north-west) and Seiont (1.4 miles west). The countryside around Caeathro includes Llyn Ffynhonnau and Twthill.
Landlord and trade work in Caeathro
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We are used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll handle the rest.
What we are called out for in Caeathro
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Customers normally contact us about:
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
- A coating lifting around the plughole
- A bath that stays dull however much you clean it
What to look for in a quote
- Who will actually do the work
- What aftercare is recommended
- A fixed price, and whether VAT is included
- How the colour is matched
Honest limits
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Leaking taps or wastes (a plumber’s job)
- Acrylic that moves when you stand in it
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send photos and we will say what we think.
What we work on
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
