Gwynedd · Wales
Bath Re-enamelling for Upper Bangor homes
Full bath re-enamelling and resurfacing in Upper Bangor, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- Chips and rust in more than one place
Bath re-enamelling in Upper Bangor, done in place
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Whether it’s a bath that stays dull however much you clean it and wear marks under the taps, we can help, on cast iron baths, acrylic baths and pressed steel baths alike.
Every repair comes with our one-year guarantee, wherever you are in Gwynedd.
- Area
- Upper Bangor (LL57, LL59)
- Area hub
- Gwynedd
- Guarantee
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Upper Bangor and the surrounding area
Upper Bangor is about 1 mile north of Bangor, in Gwynedd. Anywhere in LL57, a technician comes to you. We cover all 165 towns and villages across Gwynedd, from the larger towns to small villages. We work right across the region, from Upper Bangor to Liverpool (51 miles away).
Every address in LL57 and LL59 is within our area, from the main roads to the quietest streets. Whether you live on Hwfa Road, Love Lane and Gorad Road or a nearby road, a technician can come to you. Main roads around Upper Bangor include the A5, so getting to you is simple. If you’re just outside Upper Bangor, we cover Bangor (1 mile south), Garth (1 mile north-east), Hirael (1 mile east), Glyn Garth (1 mile north-west) and Glanadda (1 mile south). Within a short drive, we also cover Caernarfon (8 miles south-west), Bethesda (5 miles south-east), Gerlan (5 miles south-east), Braichmelyn (5 miles south-east), Llanbeblig (8 miles south-west) and Llanberis (8 miles south). As one of the bigger places in Gwynedd, Upper Bangor is somewhere we visit frequently.
Near you in Upper Bangor
Around Upper Bangor, we work in homes near Ysgol Friars, Ysgol Tryfan and Church of Our Lady and St James and the streets around them. Other local landmarks include Former Garth Primary School (0.6 miles north-east), Alice Williams Memorial Library (within half a mile south), St Mary's Church (within half a mile east) and The Menai pub (under half a mile south). The nearest railway station is Bangor (Gwynedd) station, roughly 0.5 miles south of the centre. Well-known places in the area include Deiniol (less than half a mile south-east) and Minffordd Hospital (0.9 miles south). Green spaces nearby include Llyn Celanedd and Spinnies Nature Reserve.
Towns and villages near Upper Bangor
More services for Upper Bangor
What affects the price in Upper Bangor
Resurfacing from £350. Quotes are free and the price is fixed. What we look at:
- The size and number of damaged areas
- Whether we combine several jobs
- Unusual colours or finishes
- What kind of damage it is
A repair normally costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Send pictures for a quote
You can take the pictures on your phone. Make sure they show:
- A coin beside the damage so we can judge size
- Good light, ideally daylight, without flash glare
- One picture of the entire bath
- The postcode, so we can plan the visit
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job.
Why repair rather than replace?
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Prices start from £350. The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your pictures, so you know the cost before you book.
Why us?
- Everything repaired in place
- Free fixed quotes from pictures
- Every repair guaranteed for a year
- Straight answers about what a repair can do
Read our pricing or bath cost comparison.
Your questions about bath re-enamelling in Upper Bangor
Is the work guaranteed?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
What happens if you find more damage?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
How do I book?
Send photos through the quote form or call 0345 017 0787, and we’ll take it from there.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Can pets and children be at home?
Keep pets and children away from the work area on the day.
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
What a repair can’t fix
We will not take on work that will not last, so here’s what a repair can’t put right:
- A poorly supported acrylic bath, until it’s firmed up
- Damage hidden under a previous coating, until it’s stripped back
- A bath split right through the body
If in doubt, send pictures and we’ll say what we think.
What we work on
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
How it works
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a full day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Let the surface dry out before the visit
- Keep a parking space free if you can
- Clear toiletries, mats and anything else from around the area
Ask for a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed price back. There is no charge for the quote and no obligation.
Related advice
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
We are used to working with agents and managing companies. Send the address, photos and access details and we’ll handle the rest.
Keeping it looking good
So the finish stays in good condition for years:
- A dripping tap should be fixed promptly
- Do not leave a chip unrepaired
- Use washing-up liquid and a soft cloth
- Keep suction mats out of the bath
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
About our accreditations · Every repair comes with a one-year guarantee.
