Hertfordshire · England
Bath re-enamelling & resurfacing in Caldecote, Hertfordshire
Full bath re-enamelling and resurfacing for homes and businesses in Caldecote and across Hertfordshire. Free, fixed quotes from your photos.
- Resurfacing from £350
- An old resurfacing that is failing
- Several chips and rust patches
Bath re-enamelling at your home in Caldecote
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. We are often asked to fix brown or grey marks that don’t clean off and chips and rust in more than one place, on pressed steel baths, acrylic baths and basins & shower trays.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Area
- Caldecote (SG7)
- Region
- Hertfordshire
- Cover
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How we price bath re-enamelling
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- The material
- How many areas need work
- Whether we combine several jobs
- The type of damage
A repair is priced on what needs doing, not your postcode. You will see the full price before booking, with no extras added later.
Send pictures for a quote
You can take the photos on your phone, there’s no need for anything special. Make sure they show:
- Whether it’s been repaired or coated before
- Daylight if possible, and no flash reflection
- What it’s made of, if you know
- Your postcode, so we can check dates
There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Caldecote questions
When can you do it?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Can you price it without visiting?
In nearly every case. If pictures don’t show enough, we will ask for another angle.
Can you repair something that’s been repaired before?
Most of the time. Tell us what was done before and we will plan for it.
Do you resurface freestanding baths?
Yes. We can do the inside and outside.
How long is the bath unusable?
Typically one day, with the bath ready the day after. Deeply pitted baths may need a second day.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Are there extra charges for Caldecote?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Which areas do you work in?
We cover the entire UK, including Caldecote and the rest of Hertfordshire. Send your postcode with your photos and we’ll confirm dates.
Other services in Caldecote
What we’re called out for in Caldecote
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
These are the problems we’re asked about most:
- Worn patches where water runs and sits
- A roll-top that is seen better days
- Staining under the taps and around the waste
- An outdated colour you’d like to change
Comparing quotes
- Aftercare advice
- Whether cleaning and preparation are in the price
- What happens if they find more damage
- If travel is included in the price
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs in Hertfordshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Should you replace it?
If the bath is sound, re-enamelling is generally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Why choose Surface Doctor in Caldecote
- Every repair guaranteed for a year
- Technicians who travel to you, UK-wide
- A fixed quote before you book
- Colour mixed on the day to match
Read our pricing or resurfacing vs replacement cost guide.
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
What happens on the day
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes the best part of a day. We clean up when we’re done and let you know when you can use it again.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Let us know about parking or access
- Let us know if it has been repaired before
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Related advice
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Covering Caldecote
Caldecote is about 2 miles north-east of Stotfold, in Hertfordshire. Across the SG7 area, we carry out the work at your property. Caldecote is one of 381 places in Hertfordshire where we work. Our nearest city page is London, about 37 miles away.
Jobs in SG7 work the same way as everywhere else we cover. Other places close to Caldecote include Newnham (1 mile south-east), Bury End (1 mile north), Hinxworth (1 mile north), Ashwell End (1 mile north-east) and Ashwell (2 miles east). We also work in nearby towns such as Stevenage (9 miles south), Hitchin (7 miles south-west), Letchworth (4 miles south), Letchworth Garden City (4 miles south), Baldock (3 miles south) and Benslow (6 miles south-west).
Around Caldecote
We visit homes around St Mary Magdalene's Church. Caldecote’s nearest station is Baldock station, about 2.8 miles south. Other landmarks nearby include Bygrave House (2.4 miles south-east) and Stotfold Watermill & Nature Reserve (1.5 miles south-west). For a walk, there is Arlesey Old Moat and Glebe Meadows.
Looking after it afterwards
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Avoid suction-cup mats
- Respect the curing time we give you
- Do not leave bottles, razors or sponges standing on the surface
- Stick to gentle, non-abrasive cleaners
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
About our accreditations · Every repair comes with a one-year guarantee.
