Warwickshire · England
Bath re-enamelling & resurfacing in Caldecote, Warwickshire
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Caldecote. Free, fixed quotes from your photos.
- Resurfacing from £350
- Worn patches where water runs and sits
- Stains that won’t shift
Repair or replace: which is better?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Why book with us
- A fixed quote before you book
- Every repair guaranteed for a year
- Same prices wherever you are
- Straight answers about what a repair can do
See our prices page or resurfacing vs replacement cost guide.
How we handle bath re-enamelling in Caldecote
We re-enamel plenty of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. If you are dealing with lots of chips and rust spots and a dull, rough surface that won’t come clean, we can help.
Whatever the size of the job, it’s backed by a one-year guarantee in Caldecote and across Warwickshire.
- Area
- Caldecote (CV10)
- Region
- Warwickshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Common problems we fix in Caldecote
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
Signs it’s time to call us include:
- Thin, worn enamel in places
- An outdated colour you’d like to change
- A period or roll-top bath worth keeping
- An old resurfacing that’s failing
Questions to ask before you book
- Whether the price covers travel
- How changes to the job are handled
- When it can be used again
- Is the price fixed, and does it include VAT?
Caldecote and the surrounding area
Caldecote is about 2 miles north of Nuneaton, in Warwickshire. Book a date that suits you, and we will give you an arrival time in advance, so you’re not left waiting in all day. Caldecote is one of 324 towns and villages in Warwickshire where we work. Our nearest city page is Birmingham, about 18 miles away.
We work across the CV10 postcode area and the streets around it. Local streets include Hawcutt Drive, Caldecote Hall Drive and Weddington Lane, all of which we cover. Neighbouring places we cover include Lindley (1 mile north-east), Fenny Drayton (1 mile north), Weddington (1 mile south-east), Higham on the Hill (2 miles east) and Nuneaton (2 miles south). Larger places within reach include Bedworth (5 miles south), Kenilworth (15 miles south), Fordbridge (12 miles south-west), Atherstone (3 miles north-west), Castle Vale (13 miles west) and Brownsover (15 miles south-east).
Near you in Caldecote
We visit homes around Hartshill School, Church of St Theobald and Saint Chad and Sutton Park and the streets around them. Caldecote’s nearest station is Nuneaton station, about 1.9 miles south-east. Other landmarks nearby include George Eliot Hospital Museum (2.7 miles south) and Hartshill Castle (1.6 miles west). Green spaces nearby include Ambion Hill.
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
We’re used to working with agents and managing companies. Send the address, photos and access details.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Nearby places to Caldecote
Also in Caldecote
What we can’t put right
Not everything can be repaired, and we would rather say so up front. We cannot fix:
- Steel that has corroded right through
- An acrylic bath that flexes badly underfoot
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send pictures and we’ll say what we think before you book.
Materials we repair
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
FAQs for Caldecote
Can landlords book you?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Is a repair better than a new one?
Normally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Do I need to be at home?
Someone needs to let us in and show us the job. You do not need to watch us work.
Do you work in Caldecote?
We do. Repair technicians travel to Caldecote from across the region, and the price is the same as everywhere else.
Can you quote from photos?
In nearly every case. We only ask to see it in person if the pictures can’t show what we need.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
How long does re-enamelling take?
Normally one day, with the bath ready the following day. A badly pitted bath can need a second day.
How it works
Your technician turns up when we said we would and checks the damage against your pictures first. The floor and nearby surfaces are covered before any work starts. Most visits take the best part of a day, and the room is left clean and tidy.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Keep children and pets away from the room on the day
- Let the surface dry out before the visit
- Keep a parking space free if you can
Get a quote
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.
Advice
How to look after the repair
Simple care helps the repair last. Our advice:
- Repair dripping taps early
- Respect the curing time we give you
- Dry the bath after use to stop limescale
- Clean with a soft cloth and mild detergent
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
About our accreditations · Every repair comes with a one-year guarantee.
