Warwickshire · England
Bath re-enamelling & resurfacing in Camp Hill, Warwickshire
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Camp Hill. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Wear marks under the taps
- Brown or grey marks that don’t clean off
Bath re-enamelling in Camp Hill, done in place
The bath stays where it is, so your taps, tiles and plumbing are left alone. It normally takes one visit, with the bath ready to use the following day. Typical jobs include an original cast iron bath that needs restoring and a bath that stays dull however much you clean it, across acrylic baths, cast iron baths and Victorian roll-tops.
We stand behind the work with a one-year guarantee, so you’re not left on your own once we’ve gone.
- Area
- Camp Hill (CV10, CV11)
- Area hub
- Warwickshire
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
How it works
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take the best part of a day. We clean up when we’re done and let you know when you can use it again.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Tell us about any previous repairs or coatings
- Clear toiletries, mats and anything else from around the area
- Let the surface dry out before the visit
Getting a price
Send us a photo of the damage and a wider shot of the entire item, with your CV10 postcode, and we will reply with a fixed quote.
Advice
Our work in Camp Hill
Camp Hill is about 1 mile west of Nuneaton, in Warwickshire. Across the CV10 area, we come to you. Camp Hill is one of 324 towns and villages in Warwickshire where we work. We work right across the region, from Camp Hill to Birmingham (17 miles away).
Here we cover the CV10 and CV11 postcode area. Jobs here include addresses on Tile Lane, Pool Road and Tudor Road. If you are just outside Camp Hill, we cover Stockingford (1 mile south-west), Hartshill (1 mile north-west), Galley Common (1 mile west), Ansley Common (1 mile west) and Oldbury (2 miles north-west). We also work in nearby towns such as Rugby (15 miles south-east), Bedworth (4 miles south), Kenilworth (13 miles south), Fordbridge (11 miles west), Atherstone (4 miles north-west) and Castle Vale (12 miles west).
Landmarks near Camp Hill
In Camp Hill, that means homes near St Mary and St John's Church, Hartshill School and Camp Hill Primary School. Nearby too are Sutton Park (0.8 miles north-west), Hartshill School (1.1 miles north-west) and The Royal Oak pub (0.9 miles south). Camp Hill’s nearest station is Nuneaton station, about 1.5 miles east of the centre. Further afield, we also cover the area around George Eliot Hospital (1.7 miles south-east) and George Eliot Hospital Museum (1.6 miles south-east).
Places near Camp Hill
What else we do in Camp Hill
DIY kit or professional repair?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
FAQs for Camp Hill
What happens if you find more damage?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Can I get a quote without a visit?
Normally, yes. A close-up and a wider photo are enough to give a fixed price.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Can you do the outside of a roll-top?
Yes. Inside and out.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Is there a smell?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
It’s been repaired before. Can you still fix it?
Generally, yes. Tell us what was done before and we’ll plan for it.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams in Warwickshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Repairing versus replacing in Camp Hill
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why choose Surface Doctor in Camp Hill
- Generally one visit, start to finish
- Rooms protected and left tidy
- Technicians who travel to you, UK-wide
- Accredited with CHAS, Constructionline and SafeContractor
Read our prices page or bath cost comparison.
What bath re-enamelling costs
Resurfacing from £350. There’s no area surcharge for Camp Hill. What changes the price is:
- Access to the area
- Whether old repairs or coatings need taking off
- How many items we do on one visit
- How many areas need work
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Send pictures for a quote
The better the pictures, the more accurate the price. Here’s what we find most useful:
- One picture of the whole bath
- Natural light rather than flash
- Where you are, by postcode
- A close-up of the damage, in focus
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Signs you need bath re-enamelling in Camp Hill
Older baths often have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Most people get in touch after spotting something like this:
- A coloured bath you want in white
- Staining under the taps and around the waste
- Several chips and rust patches
- A dull, rough surface that won’t come clean
Comparing quotes
- How to look after the finish
- What happens if they find more damage
- Whether there are any call-out or travel charges
- Whether a trained technician does the job
Looking after it afterwards
Aftercare is simple:
- Use washing-up liquid and a soft cloth
- Don’t use the bath until it has fully cured
- Don’t leave bottles, razors or sponges standing on the surface
- Get any chip repaired quickly
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
About our accreditations · Every repair comes with a one-year guarantee.
