Dorset · England
Bath Re-enamelling for Cann homes
Local bath re-enamelling for Cann: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Worn patches where water runs and sits
- Brown or grey marks that do not clean off
What we do, step by step
Visits start with a quick look at the job together. Next, we cover and mask everything nearby and we start. You can expect it to take a full day.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can usually be used the next day.
How to prepare
- Open a window if you can
- Tell us about any previous repairs or coatings
- Tell us about parking, stairs or access
Ask for a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Advice
About our bath re-enamelling in Cann
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It’s the answer when the whole bath is tired rather than one spot. If you’re dealing with several chips and rust patches and a peeling or bubbling previous coating, we can help, on cast iron baths, pressed steel baths and acrylic baths alike.
All of our repairs are guaranteed for twelve months in Cann and everywhere else. If something goes wrong with the work, we come back.
- Where
- Cann (SP7)
- Region
- Dorset
- Guarantee
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Landlords, agents and businesses in Cann
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Landlords, letting agents and housing providers in Cann use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Places near Cann
What else we do in Cann
When to call us in Cann
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
The most common problems we are called about are:
- Worn patches where water runs and sits
- A dull, rough surface that will not come clean
- Staining under the taps and around the waste
- Lots of chips and rust spots
Before booking anyone
- Aftercare advice
- Whether the colour is mixed to match
- Whether there are any call-out or travel charges
- What prep work is covered
Cann questions
What happens once I’ve sent photos?
You get a fixed quote and available dates. If we need another angle, we will ask.
How soon can you come?
That depends on our diary for your area. We will offer you dates when we send your quote.
Do you resurface freestanding baths?
Yes. We can do the inside and outside.
Do you work in Cann?
Yes. We cover the entire UK and travel to Cann and the rest of Dorset. Send photos and we will quote, or call 0345 017 0787.
How do I book?
A close-up, a wider photo and your postcode. Then we will agree a date.
Do you need to take the bath out?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
How much does bath re-enamelling cost in Cann?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
What affects the price in Cann
Resurfacing from £350. We charge the same across the UK, including Cann. What changes the price is:
- The material
- Doing more than one item at once
- Whether old repairs or coatings need taking off
- How much damage there is
A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with nothing added on the day.
Quotes from your photos
Before you send pictures, these tips help us give you a firm price:
- Where you are, by postcode
- Natural light rather than flash
- A close-up of the damage, in focus
- A coin or ruler next to the damage for scale
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Our work in Cann
Cann is about 9 miles north of Blandford Forum, in Dorset. We visit homes and businesses in Cann, so nothing has to leave your home. Cann is one of 462 places in Dorset we cover.
Here we cover the SP7 postcode area. You’ll find streets such as Foot's Hill, Bozley Hill and Cann Hill. Nearby, we also work in West Melbury (1 mile south-west), Cann Common (1 mile east), East Melbury (1 mile south-east), Melbury Abbas (1 mile south-east) and Compton Abbas (2 miles south). Further out, we also cover Blandford Forum (9 miles south), Verwood (15 miles south-east), Gillingham (5 miles north-west), Sherborne (15 miles west), Peacemarsh (6 miles north-west) and Sturminster Newton (7 miles south-west).
Around Cann
Around Cann, we work in homes near Shaftesbury School, St Mary's School and Church of St Thomas. Further afield, we also cover the area around Kings Court Palace (4.8 miles north-west) and Westminster Memorial Hospital (1.4 miles north-west). For a walk, there is Melbury Hill.
Honest limits
We’ll always be straight with you, so here’s what a repair can’t fix:
- Acrylic that moves when you stand in it
- A metal bath with a through crack
- Damage hidden under a previous coating, until it’s stripped back
Send us pictures and we’ll tell you honestly before you book.
Materials we work on in Cann
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- Don’t leave bottles, razors or sponges standing on the surface
- Respect the curing time we give you
- A quick wipe after use keeps limescale away
- Never use suction bath mats
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Why repair rather than replace?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Our bath re-enamelling starts from £350. We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Cann customers choose us
- We leave the room as we found it
- No need to remove anything
- One-year guarantee on every repair
- We’ll tell you if it’s not worth repairing
Read our full price list or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
