Dorset · England

Bath Re-enamelling in Melbury Abbas

Bath re-enamelling in Melbury Abbas without the cost of replacing. Send us photos for a fixed price, then we come to you.

  • Resurfacing from £350
  • Brown or grey marks that do not clean off
  • A roll-top that is seen better days
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Melbury Abbas

What bath re-enamelling costs

Prices start from £350. A fixed quote means you know the cost before you book. We take into account:

  • Unusual colours or finishes
  • Where the damage is and how we get to it
  • What the surface is made of
  • Doing more than one item at once

Our prices are the same across the UK, with no extra for Melbury Abbas. What changes the price is the job itself: the material, the amount of damage and how many items.

Quotes from your pictures

Most quotes are done from pictures alone. To make it quick:

  • Any details about the material
  • The postcode, so we can plan the visit
  • A picture taken from further back
  • Details of any past repairs

The quickest way to a price is to send two or three pictures through our quote form or call us. We’ll say straight away if a repair is the right fix.

Bath re-enamelling in Melbury Abbas without replacing anything

Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. If you are dealing with worn patches where water runs and sits and an original cast iron bath that needs restoring, we can normally put it right.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Stained basin resurfaced to clean white (before and after)
Location
Melbury Abbas (SP7)
Area hub
Dorset
Cover
12 months on all our work
Quote
From £350. Free, fixed price from pictures
Call
0345 017 0787
Updated
23 October 2026

How it works

We begin by going over the job with you. After that, protection goes down around the work area and the work begins. It normally takes most of the day, and we will keep you posted as we go.

  1. We check the bath and agree the finish with you.
  2. Taps, tiles and the floor are masked off.
  3. We degrease the bath, fix any damage and key the surface.
  4. Primer and finish coats are applied.
  5. The masking comes off, we tidy up and tell you when it can be used.

Getting ready for the visit

  • Keep a parking space free if you can
  • Avoid using the area for a few hours before we arrive
  • Make sure the room can be ventilated

Get a quote

Upload pictures of the damage and a wider shot of the entire item, with your SP7 postcode, and we will come back with a fixed quote.

Get a free quote

Related advice

What we cannot put right

To be straight with you, some problems need a different fix:

  • A bath that’s rusted through
  • Damage hidden under a previous coating, until it’s stripped back
  • An acrylic bath that flexes badly underfoot

Not sure? Send photos and we will give you a straight answer.

Materials we repair

  • Cast iron baths
  • Victorian roll-tops
  • Acrylic baths
  • Basins & shower trays
  • Pressed steel baths

Should I try a DIY kit first?

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.

Melbury Abbas questions

Which areas do you work in?

All of Dorset, and the rest of the UK. There’s no extra charge for travel.

How soon can you come?

That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.

Does someone need to be in?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Does the bath have to be removed?

No. It’s re-enamelled where it stands, so nothing else is disturbed.

What happens next?

You get a fixed quote and available dates. If we need another angle, we’ll ask.

Will it make a mess?

No. The work area is masked and covered, and we leave the room clean.

Do you resurface freestanding baths?

Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.

Is my repair covered?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

Do you need bath re-enamelling in Melbury Abbas?

In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.

The most common problems we are called about are:

  • Thin, worn enamel in places
  • Chips and rust in more than one place
  • An outdated colour you’d like to change
  • A peeling or bubbling previous coating

What your quote should include

  • Whether a trained technician does the job
  • A fixed price, and whether VAT is included
  • How the colour is matched
  • Whether the price covers travel

Choosing a repair company

Where we work around Melbury Abbas

Melbury Abbas is about 8 miles north of Blandford Forum, in Dorset. Across the SP7 area, we come to you. Melbury Abbas is one of 462 towns and villages in Dorset we cover.

All of SP7 is covered. From Melbury Street, White Pit Lane and Dinah's Hollow or anywhere nearby, we can come to you. Neighbouring places we cover include East Melbury (1 mile north-east), Cann Common (1 mile north), West Melbury (1 mile north-west), Cann (1 mile north-west) and Compton Abbas (1 mile south-west). Larger places within reach include Wimborne Minster (15 miles south-east), Blandford Forum (8 miles south), Verwood (15 miles south-east), Gillingham (6 miles north-west), Sherborne (15 miles west) and Peacemarsh (7 miles north-west).

Local landmarks in Melbury Abbas

Typical jobs here are in homes near Church of St Thomas and Shaftesbury School. Nearby you’ll also find Gold Hill Museum (2.3 miles north-west) and Westminster Memorial Hospital (2.4 miles north-west). Open spaces near Melbury Abbas include Melbury Hill.

Map of Melbury Abbas © OpenStreetMap contributors

Repair or replace: which is better?

Replacing a bath usually involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, with the bath ready the following day. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

What you get with us

  • A year’s guarantee on all work
  • Colour mixed on the day to match
  • We leave the room as we found it
  • We come to you, anywhere in the UK

Read our prices page and resurfacing vs replacement cost guide.

For landlords and businesses

Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.

Looking after it afterwards

To keep it looking its best for years:

  • Clean with a soft cloth and mild detergent
  • Fix dripping taps quickly
  • Wash away dyes and oils after use
  • Keep toiletries on a shelf rather than in the bath

Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.

On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.