Lincolnshire · England
Bath re-enamelling & resurfacing in Carlton-le-Moorland, Lincolnshire
Full bath re-enamelling and resurfacing for homes and businesses in Carlton-le-Moorland and across Lincolnshire. Free, fixed quotes from your photos.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- Chips and rust in more than one place
Bath re-enamelling in Carlton-le-Moorland, done in place
We re-enamel plenty of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. If you are dealing with staining under the taps and around the waste and a bath that stays dull however much you clean it, we can help, whatever the material.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Carlton-le-Moorland (LN5)
- County
- Lincolnshire
- Warranty
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
FAQs for Carlton-le-Moorland
What information do you need?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
When can you do it?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
Which areas do you work in?
We cover the whole UK, including Carlton-le-Moorland and the rest of Lincolnshire. Send your postcode with your photos and we will confirm dates.
Will the price change on the day?
The price is fixed for what the pictures show. If there’s more, we’ll tell you before starting.
Is there a guarantee?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
What affects the price in Carlton-le-Moorland
Resurfacing from £350. We don’t charge extra for travel to Carlton-le-Moorland. The price depends on:
- Whether it’s a chip, crack, burn or wear
- The size and number of damaged areas
- Where the damage is and how we get to it
- What the surface is made of
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Quotes from your pictures
We price nearly every job from photos. This is what we need:
- The material, if you know it
- A coin or ruler next to the damage for scale
- A clear, close picture of the problem area
- Good light, ideally daylight, without flash glare
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price.
Why repair rather than replace?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
What you get with us
- A year’s guarantee on all work
- Free fixed quotes from pictures
- Colour-matched on site
- Rooms protected and left tidy
Read our prices page and bath cost comparison.
Common problems we fix in Carlton-le-Moorland
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
You may need us if you’ve spotted any of these:
- Worn patches where water runs and sits
- An old resurfacing that is failing
- An original cast iron bath that needs restoring
- Several chips and rust patches
What to look for in a quote
- What prep work is covered
- Whether a trained technician does the job
- If travel is included in the price
- What happens if they find more damage
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Where we work around Carlton-le-Moorland
Carlton-le-Moorland is about 6 miles south-west of North Hykeham, in Lincolnshire. Whether you’re in the middle of Carlton-le-Moorland or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Carlton-le-Moorland is one of 732 towns and villages in Lincolnshire where we work. Our jobs stretch from Carlton-le-Moorland to Leeds (about 61 miles away).
Jobs in LN5 are booked in the same way as anywhere else. From High Street, Grange Court and Broughton Road or anywhere nearby, a technician can come to you. We also cover the places around Carlton-le-Moorland: Bassingham (1 mile north), Norton Disney (1 mile north-west), Stapleford (2 miles west), Thurlby (2 miles north) and Witham St Hughs (3 miles north). Within a short drive, we also cover Lincoln (9 miles north-east), Grantham (14 miles south), Sleaford (12 miles south-east), North Hykeham (6 miles north-east), Birchwood (7 miles north) and Hykeham (6 miles north-east).
Near you in Carlton-le-Moorland
Locally, our jobs take us to homes close to Bassingham Primary School, Church of Saint Mary and The White Hart pub, among other places. The nearest railway station is Swinderby station, roughly 4.6 miles north-west. Other landmarks nearby include Holme Spinney (4.3 miles south-west). Not far away are Tunman Wood.
What we cannot put right
It helps to know what we cannot do too:
- A bath split right through the body
- An acrylic bath that flexes badly underfoot
- Damage hidden under a previous coating, until it’s stripped back
Send us pictures and we will tell you honestly.
Surfaces we repair
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
The process
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes a full day. We clean up when we are done and let you know when you can use it again.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Mention if the room is upstairs or in a flat
- Clear the area around the damage
Ask for a price
Upload photos of the damage and a wider shot of the whole item, with your LN5 postcode, and we will reply with a fixed price.
Read more
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Work for landlords and builders
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
We’re used to working with agents and managing companies. Send the address, photos and access details.
Also near Carlton-le-Moorland
More services for Carlton-le-Moorland
About our accreditations · Every repair comes with a one-year guarantee.
