Staffordshire · England
Bath Re-enamelling in Cheslyn Hay
Problem with your bath in Cheslyn Hay? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
Bath re-enamelling at your home in Cheslyn Hay
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Our repair technicians work on acrylic baths, cast iron baths and basins & shower trays, and the jobs we see most are a bath in a colour that no longer suits and a dull, rough surface that won’t come clean.
We stand behind the work with a one-year guarantee.
- Area
- Cheslyn Hay (WS6)
- Region
- Staffordshire
- Guarantee
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What we do, step by step
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job normally takes a full day. We tidy up before we leave and tell you when it’s ready to use.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the day after.
Before we arrive
- Ensure the area is dry
- Keep children and pets away from the room on the day
- Mention if the room is upstairs or in a flat
How to get a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
Advice
When to call us in Cheslyn Hay
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Most people get in touch after spotting one of these:
- A roll-top that is seen better days
- A bath that stays dull however much you clean it
- A peeling or bubbling previous coating
- Worn patches where water runs and sits
What to look for in a quote
- What prep work is covered
- Whether the price covers travel
- How long it needs to cure
- How your room will be protected
DIY repairs versus a professional job
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Cheslyn Hay questions
What happens after I send photos?
You get a fixed quote and available dates. If anything’s unclear, we will ask for another photo.
Can you do more than one item on the same visit?
Of course, and it generally saves money. Just add the extra items to your pictures and we’ll quote them together.
Do you come to Cheslyn Hay?
Yes, we do. We send a technician to Cheslyn Hay for every job, and the price is the same as everywhere else.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted before the end of a tenancy.
Is there a smell?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
How long will the bath be out of use?
Normally one day, with the bath ready the following day. Deeply pitted baths may need a second day.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Also near Cheslyn Hay
More services for Cheslyn Hay
Landlord and trade work in Cheslyn Hay
If you manage property in Cheslyn Hay, we’ll quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
Should you replace it?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- One visit for most repairs
- Straight answers about what a repair can do
- Work done at your home or business
- Everything repaired in place
See our pricing and guide to resurfacing and replacement costs.
What bath re-enamelling costs
Resurfacing from £350. You will not pay by the hour. The price is based on:
- How many items we do on one visit
- Any earlier repairs that need removing first
- The material and finish
- Unusual colours or finishes
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
Getting a price from pictures
You can take the photos on your phone. Ensure they show:
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
- The material, if you know it
The quickest way to a price is to send two or three pictures using our quote form or call us. We will tell you honestly whether it can be repaired.
When we would advise against a repair
A repair is not right for every job, for example:
- Leaks from fittings rather than the bath
- Problems we cannot see until an old finish comes off
- Steel that has corroded right through
Send us pictures and we’ll tell you honestly.
What we work on
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Basins & shower trays
Where we work around Cheslyn Hay
Cheslyn Hay is about 3 miles south of Cannock, in Staffordshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in 512 places in Staffordshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 14 miles away.
We work across WS6 and the streets around it. You’ll find streets such as High Street, Grassmere Court and Rosemary Avenue, all of which we cover. Other places close to Cheslyn Hay include Littlewood (1 mile north-east), Great Wyrley (1 mile east), Landywood (1 mile south-east), Upper Landywood (1 mile south) and Middle Hill (1 mile north-west). Larger places within reach include Stafford (11 miles north), Tamworth (15 miles east), Cannock (3 miles north), Lichfield (9 miles east), Rugeley (8 miles north-east) and Burntwood (5 miles east).
Local landmarks in Cheslyn Hay
We visit homes around Glenthorne Community Primary School, Cheslyn Hay Sport and Community High School and Salem Church and the streets around them. The closest station to Cheslyn Hay is Landywood station, about 0.6 miles south-east of the centre. Further afield, we also cover the area around Cannock Chase Hospital (2.2 miles north) and Cheslyn Hay South (within half a mile south). For a walk, there’s Pouk Hill.
How to look after the repair
Good habits make a big difference to how long a repair lasts:
- Rinse off hair dye, oils and bath bombs straight away
- A dripping tap should be fixed promptly
- Clean with a soft cloth and mild detergent
- Store bottles off the bath
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
About our accreditations · Every repair comes with a one-year guarantee.
