Staffordshire · England
Bath re-enamelling & resurfacing in Tamworth, Staffordshire
Bath re-enamelling in Tamworth without the cost of replacing. Send us pictures for a fixed price, then book a visit.
- Resurfacing from £350
- Several chips and rust patches
- Thin, worn enamel in places
The process
Here’s how a visit generally runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Plan for most of the day from start to finish. Before leaving, we tell you how long to leave it and how to look after it.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the following day, the bath is ready.
How to prepare
- Point us to the nearest place to park
- Let the surface dry out before the visit
- Keep pets and children out of the room while we work
Ask for a price
Most customers in Tamworth get their price from photos. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Read more
About our bath re-enamelling in Tamworth
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. We are often asked to fix thin, worn enamel in places and an original cast iron bath that needs restoring, across pressed steel baths, acrylic baths and Victorian roll-tops.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll come back.
- Area
- Tamworth (B77, B79, B78)
- Region
- Staffordshire
- Cover
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Common questions in Tamworth
Can you repair several things at once?
Of course, and it typically saves money. Just add the extra items to your photos and you will get one combined price.
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
Is there a smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
Can you quote from photos?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
When can you do it?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
How long is the bath unusable?
Generally one day, with the bath ready the day after. Deeply pitted baths may need a second day.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Is there a call-out fee?
We do not add a call-out fee. Your fixed quote includes everything.
Aftercare tips
Most damage we see is avoidable. A few tips:
- Repair dripping taps early
- Avoid suction-cup mats
- Rinse off hair dye, oils and bath bombs immediately
- A quick wipe after use keeps limescale away
Dry the bath after use if possible, especially in hard water areas, and rinse off any bath products.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Prices start from £350. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why Tamworth clients choose us
- Usually one visit, start to finish
- Same prices wherever you are
- Honest advice, even when it means no job
- Every repair guaranteed for a year
See our pricing or guide to resurfacing and replacement costs.
Landlord and trade work in Tamworth
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Common problems we fix in Tamworth
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
If you can see any of these, send us a photo:
- Wear marks under the taps
- An old resurfacing that is failing
- Stains that will not shift
- Lots of chips and rust spots
What to look for in a quote
- How the colour is matched
- When it can be used again
- A fixed price, and whether VAT is included
- How changes to the job are handled
Covering Tamworth
Tamworth is about 14 miles north-east of Birmingham, in Staffordshire. We travel to clients in Tamworth and nearby villages, so you don’t need to take anything anywhere. We cover all 512 towns and villages across Staffordshire. We work right across the region, from Tamworth to Birmingham (14 miles away).
Jobs in B77, B79 and B78 are booked in the same way as anywhere else. You will find streets such as Market Street, High Street and Church Road, and we cover them all. Being close to the A5 and A51, Tamworth is simple for us to get to. Close by, we cover Glascote (1 mile south-east), Bolehall (1 mile south-west), Belgrave (1 mile south), Amington (1 mile north-east) and Perry Crofts (1 mile north). Further out, we also cover Burton upon Trent (12 miles north), Cannock (15 miles west), Lichfield (7 miles north-west), Rugeley (14 miles north-west), Burntwood (11 miles west) and Hednesford (15 miles north-west). As one of the bigger places in Staffordshire, Tamworth is somewhere we visit frequently.
Local landmarks in Tamworth
Our clients here include homes close to Church of St George, William MacGregor Primary School and The Bole Bridge pub, among other places. You’ll also find Landau Forte Academy Tamworth Sixth Form (1 mile north-west) and Landau Forte Academy (0.8 miles east). Tamworth’s nearest station is Tamworth station, roughly 0.7 miles north-west. Well-known places in the area include Tamworth Castle (0.8 miles west) and Tamworth Castle (0.8 miles west). Not far away are Middleton Lakes RSPB reserve.
What a repair cannot fix
Some jobs aren’t right for a repair, including:
- A poorly supported acrylic bath, until it’s firmed up
- Anything hidden under an old coating, until we remove it
- Leaking taps or wastes (a plumber’s job)
Send us photos and we will tell you honestly before you book.
What we work on
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
Towns and villages near Tamworth
What else we do in Tamworth
What bath re-enamelling costs
Prices start from £350. We give every job a fixed quote from pictures. This is what makes a difference:
- Doing more than one item at once
- What the surface is made of
- Any earlier repairs that need removing first
- How hard the colour is to match
A repair generally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Send photos for a quote
We price nearly every job from photos. This is what we need:
- Any earlier repairs or coatings
- The material, if you know it
- Your postcode, so we can check dates
- A clear, close picture of the problem area
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.
About our accreditations · Every repair comes with a one-year guarantee.
