Devon · England
Bath Re-enamelling for Chevithorne homes
We travel to Chevithorne for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A coating lifting around the plughole
- Enamel that’s lost its shine and feels rough
Repairing versus replacing in Chevithorne
Replacing the bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Re-enamelling gives the bath a new finish without moving it. Prices start from £350. Compared with replacing, repairing typically costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
What you get with us
- A year’s guarantee on all work
- Same prices wherever you are
- Straight answers about what a repair can do
- Fixed prices from your photos
Take a look at our full price list or resurfacing vs replacement cost guide.
Bath re-enamelling in Chevithorne without replacing anything
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. Whether it’s stains that won’t shift and several chips and rust patches, we can generally put it right, on basins & shower trays, Victorian roll-tops and pressed steel baths alike.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Location
- Chevithorne (EX16)
- County
- Devon
- Cover
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Chevithorne and the surrounding area
Chevithorne is about 2 miles north-east of Tiverton, in Devon. Clients in Chevithorne get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Chevithorne is one of 586 towns and villages in Devon we cover.
We cover every part of the EX16 postcode area. Nearby, we also work in Hayne (1 mile west), Bolham (2 miles west), Tiverton (2 miles south-west), Uplowman (2 miles east) and Halberton (2 miles south-east). We also work in nearby towns such as Exeter (14 miles south), Honiton (15 miles south-east), St Thomas (15 miles south), Larkbeare (15 miles south), Polsloe (14 miles south) and Cullompton (6 miles south-east).
What’s near Chevithorne
In Chevithorne, that means homes near Tiverton High School and Church of St Thomas. For rail, the closest station is Tiverton Parkway station, roughly 4.3 miles east. Other landmarks nearby include Tiverton Castle (2.1 miles south-west) and Belmont Hospital (1.8 miles south-west).
What we’re called out for in Chevithorne
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Customers typically contact us about:
- Enamel that is lost its shine and feels rough
- Worn patches where water runs and sits
- Several chips and rust patches
- A bath in a colour that no longer suits
What to look for in a quote
- Whether there are any call-out or travel charges
- Whether the colour is mixed to match
- What aftercare is recommended
- How the room is protected while they work
More services for Chevithorne
For landlords and businesses
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
FAQs for Chevithorne
Does re-enamelling smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Someone resurfaced my bath and it’s peeling. Can you help?
Usually, yes. We strip the failing coating and resurface it properly. Mention it when you send pictures.
How long does re-enamelling take?
Most baths are done in a day, ready the following day. We will confirm timings when we quote.
Is there any odour?
There can be some smell while we work, so we ventilate the room. It fades as everything cures.
Can you quote from photos?
Nearly always. If photos do not show enough, we will ask for another angle.
Can you resurface a pink bath in white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
What happens on the day
Your technician turns up when we said we would, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before any work starts. Most visits take the best part of a day, and the room is left clean and tidy.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Keep pets and children out of the room while we work
- Let the surface dry out before the visit
- Let us know about parking or access
Get a quote
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Read more
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- Get any chip repaired quickly
- Do not leave bottles, razors or sponges standing on the surface
- Never use suction bath mats
- Clean with a soft cloth and mild detergent
Use mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
Honest limits
In fairness, there are a few things a repair will not fix:
- Leaks from fittings rather than the bath
- Damage hidden under a previous coating, until it’s stripped back
- An acrylic bath that flexes badly underfoot
If in doubt, send pictures and we will say what we think before booking.
Materials we repair
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
