Buckinghamshire · England
Bath re-enamelling & resurfacing in Chilton, Buckinghamshire
Our repair technicians come to Chilton for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- Several chips and rust patches
Bath re-enamelling in Chilton, done in place
Most baths are re-enamelled in a day, with the bath ready to use the following day. Nothing is disconnected or removed. Our technicians work on pressed steel baths, acrylic baths and Victorian roll-tops, and common reasons people contact us are enamel that’s lost its shine and feels rough and several chips and rust patches.
All our work comes with a one-year guarantee, wherever you are in Buckinghamshire.
- Where
- Chilton (HP18)
- County
- Buckinghamshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Repair or replace: which is better?
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Resurfacing renews the whole surface without moving it. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why us?
- CHAS and Constructionline accredited
- Colours mixed by hand to suit your surface
- Rooms protected and left tidy
- Honest advice, even when it means no job
See our full price list or guide to resurfacing and replacement costs.
What we cannot put right
To be straight with you, there are a few things a repair will not fix:
- Leaking taps or wastes (a plumber’s job)
- A poorly supported acrylic bath, until it’s firmed up
- Problems we can’t see until an old finish comes off
Send us photos and we’ll tell you honestly.
What we work on
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Common questions in Chilton
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
How do I get a price for bath re-enamelling in Chilton?
Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Is repairing better than replacing?
Usually, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Can you quote from pictures?
Usually, yes. Clear pictures let us give you a fixed quote without visiting.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside if you’d like.
How to look after the repair
Nothing complicated is needed, just a few sensible habits:
- A dripping tap should be fixed promptly
- Store bottles off the bath
- Never use suction bath mats
- Leave the bath for the full curing time before using it
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
About Chilton
Chilton is about 4 miles north of Thame, in Buckinghamshire. Jobs in Chilton are booked in like any other job: a fixed quote from your photos, then a visit to do the work. We work in 263 places in Buckinghamshire, from the larger towns to small villages. Our nearest city page is London, about 44 miles away.
Our repair technicians cover all of the HP18 postcode area and the streets around it. Local streets include Thame Road, Chapel Lane and Princes Close, all of which we cover. Other places close to Chilton include Easington (1 mile south), Shabbington (3 miles south-west), Little Ickford (3 miles south-west), Ickford (3 miles south-west) and North Weston (4 miles south). We also work in nearby towns such as Aylesbury (8 miles east), Buckingham (14 miles north), Elmhurst (9 miles east), Southcourt (8 miles east), Princes Risborough (9 miles south-east) and Haydon Hill (7 miles east).
Landmarks near Chilton
In Chilton, that means homes near The Poacher's Pocket pub and Parish Church of St Mary and the streets around them. For rail, the closest station is Haddenham & Thame Parkway station, roughly 3.1 miles south-east of the centre. Well-known places in the area include Thame Museum (3.4 miles south) and Dinton Castle (4.7 miles east). Green spaces nearby include Snakemoor.
The process
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a full day, and we finish by cleaning up and talking you through the result.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the next day.
Preparing for the visit
- Tell us if there are stairs or a lift
- Ensure the room can be ventilated
- Move bottles, mats and clutter away from the area
Getting a price
Most customers in Chilton get their price from pictures. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Related advice
Places near Chilton
Other services in Chilton
How we price bath re-enamelling
Resurfacing from £350. Prices are worked out job by job, from your photos. The main factors are:
- How many items we do on one visit
- Access to the area
- The material and finish
- How much damage there is
Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.
How to get a fixed price
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Where you are, by postcode
- One picture of the whole bath
- What it’s made of, if you know
- Natural light rather than flash
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
Landlords, agents and businesses in Chilton
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
About our accreditations · Every repair comes with a one-year guarantee.
