Oxfordshire · England
Bath re-enamelling & resurfacing in Churchill, Oxfordshire
Bath re-enamelling in and around Churchill: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Lots of chips and rust spots
- A dull, rough surface that will not come clean
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Bath re-enamelling at your home in Churchill
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We regularly repair cast iron baths, acrylic baths and basins & shower trays, and people most frequently call us about a coating lifting around the plughole and a period or roll-top bath worth keeping.
A one-year guarantee comes as standard.
- Area
- Churchill (OX7)
- County
- Oxfordshire
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
About Churchill
Churchill is about 10 miles north-west of Witney, in Oxfordshire. We travel to homes and businesses in Churchill and nearby villages, so there’s no workshop to go to. Churchill is one of 443 towns and villages in Oxfordshire we cover. Our nearest city page is Birmingham, about 41 miles away.
All of OX7 is within our area, from the main roads to the quietest streets. Whether you live on Hackers Lane, William Smith Close and Junction Road or anywhere nearby, a technician can come to you. Close by, we cover Sarsden (1 mile south-east), Salford (3 miles north), Chipping Norton (3 miles north-east), Over Norton (3 miles north-east) and Great Rollright (5 miles north-east). Further out, we also cover Banbury (15 miles north-east), Witney (10 miles south-east), Carterton (10 miles south), Kidlington (15 miles south-east), Neithrop (14 miles north-east) and Ruscote (14 miles north-east).
What’s near Churchill
Around Churchill, we work in homes near Kingham Primary School, Church of All Saints and The Chequers pub. Churchill’s nearest station is Kingham station, about 1.7 miles south-west of the centre. Well-known places in the area include Wheelbarrow Castle (4.5 miles north) and Chipping Norton Museum (2.7 miles north-east).
Common questions in Churchill
Can you change the colour of my bath?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
What happens after I send pictures?
You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit generally costs less than separate visits. Include photos of each item.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Is there a smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Is my repair covered?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
How soon can you come?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
Places near Churchill
Also in Churchill
Keeping it looking good
After the repair has cured, a few habits help it last:
- Repair dripping taps early
- Do not let dyes or oils sit on the finish
- Store bottles off the bath
- Use washing-up liquid and a soft cloth
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
What we cannot put right
A repair is not right for every job, including:
- Plumbing leaks, which need a plumber
- A bath split right through the body
- Anything hidden under an old coating, until we remove it
If in doubt, send photos and we will say what we think before you book.
Surfaces we repair
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
How it works
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take the best part of a day. We tidy up before we leave and tell you when it’s ready to use.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
Before we arrive
- Tell us if there are stairs or a lift
- Open a window if you can
- Clear toiletries, mats and anything else from around the area
Ask for a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and you are under no obligation.
Advice
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
For landlords and businesses
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
What bath re-enamelling costs
Prices start from £350. There is no charge for travel to Churchill. The price depends on:
- What the surface is made of
- Whether old repairs or coatings need taking off
- Whether we combine several jobs
- How hard the colour is to match
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Getting a price from pictures
The better the pictures, the more accurate the price. Here’s what we find most useful:
- Whether it’s been repaired or coated before
- The postcode, so we can plan the visit
- A coin or ruler next to the damage for scale
- Any details about the material
You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
What we’re called out for in Churchill
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Typical reasons for a call-out include:
- Brown or grey marks that don’t clean off
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
- An old resurfacing that is failing
What your quote should include
- Whether the colour is mixed to match
- How to look after the finish
- If travel is included in the price
- What happens if the damage is worse than the pictures show
About our accreditations · Every repair comes with a one-year guarantee.
