Warwickshire · England
Bath Re-enamelling in Long Compton
Full bath re-enamelling and resurfacing at your home in Long Compton, with a one-year guarantee on every repair.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A bath that stays dull however much you clean it

Keeping it looking good
It’s all simple stuff, just a few sensible habits:
- Fix dripping taps quickly
- Wipe the bath dry after use in hard water areas
- Never use suction bath mats
- Have chips seen to early
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
Bath re-enamelling at your home in Long Compton
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Whether it’s a period or roll-top bath worth keeping and staining under the taps and around the waste, we can usually put it right, whatever the material.
You’re covered for a year from the day of the repair. Just call us if there’s a problem and we’ll sort it.
- Location
- Long Compton (CV36)
- Region
- Warwickshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026

Can I fix it myself?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Honest limits
We would rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- Steel that has corroded right through
- An acrylic bath that flexes badly underfoot
- A bath split right through the body
Send us pictures and we’ll tell you honestly before booking.
Materials we work on in Long Compton
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Cast iron baths
What happens on the day
Nothing needs to be moved out of the room. We bring everything we need with us, lay protective sheets and get going once we have agreed what we’re doing. It usually takes the best part of a day, and you are welcome to carry on with your day while we work.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
Before we arrive
- Let us know about parking or access
- Tell us about any previous repairs or coatings
- Let us know which floor the room is on
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them over. You’ll get a fixed quote, not an estimate.
Related advice
Also near Long Compton
Also in Long Compton
Long Compton: your questions answered
How long will the bath be out of use?
Most baths are done in a day and can be used the day after. We’ll confirm timings when we quote.
Can you do the outside of a roll-top?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we’re working in. We’ll let you know when it’s safe to use again.
It’s been repaired before. Can you still fix it?
Generally, yes. We remove the old repair before doing a new one, so mention it when you send photos.
How much does bath re-enamelling cost in Long Compton?
Resurfacing from £350. Every job gets a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo with your CV36 postcode.
When can you do it?
That depends on our diary for your area. We will offer you dates when we send your quote.
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Repairing versus replacing in Long Compton
A replacement frequently means several trades over several days. Resurfacing takes one technician and usually a day, and the bath is usable the day after. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
What you get with us
- Colours mixed by hand to suit your surface
- Work done at your home or business
- We will tell you if it’s not worth repairing
- Most jobs done in one visit
Read our full price list or guide to resurfacing and replacement costs.
How we price bath re-enamelling
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- Whether old repairs or coatings need taking off
- Where the damage is and how we get to it
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
The price reflects the work involved, not where you live. You will see the full price before you book, with nothing added on the day.
Quotes from your pictures
Before you send pictures, a few simple things make all the difference:
- The postcode, so we can plan the visit
- The material, if you know it
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Common problems we fix in Long Compton
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.
People normally call us when they notice one of these:
- Wear marks under the taps
- A coloured bath you want in white
- Brown or grey marks that do not clean off
- A dull, rough surface that will not come clean
Comparing quotes
- What preparation is included
- The length of the guarantee and what it covers
- Whether they match the colour on site
- How the room is protected while they work
Covering Long Compton
Long Compton is about 11 miles south-west of Banbury, in Warwickshire. Wherever you are in the CV36 postcode area, a technician comes to you. We work in all 324 towns and villages in Warwickshire, from the larger towns to small villages. We work right across the region, from Long Compton to Birmingham (36 miles away).
Postcode districts we cover here: CV36. That includes homes on East Street, The Butts and Broad Street. Other places close to Long Compton include Great Rollright (2 miles south-east), Salford (3 miles south), Over Norton (3 miles south-east), Chipping Norton (4 miles south) and Churchill (5 miles south). Larger places within reach include Stratford-upon-Avon (15 miles north), Shipston-on-Stour (5 miles north), Wellesbourne (14 miles north), Middle Quinton (12 miles north-west), Meon Vale (12 miles north-west) and Lighthorne Heath (15 miles north).
Near you in Long Compton
Locally, our jobs take us to homes close to Acorns Primary School and Church of St Peter and St Paul, among other places. A little further out are Ellen Badger Hospital (5.5 miles north) and Wheelbarrow Castle (1.7 miles south-west). Open spaces near Long Compton include Castle Hill and Woodford Bottom and Lamb's Pool.
About our accreditations · Every repair comes with a one-year guarantee.

