Warwickshire · England
Bath Re-enamelling for Churchover homes
Full bath re-enamelling and resurfacing in Churchover, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A coloured bath you want in white
- A dull, rough surface that will not come clean
Bath re-enamelling in Churchover, done in place
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. We regularly repair pressed steel baths, Victorian roll-tops and cast iron baths, and people most often call us about thin, worn enamel in places and an original cast iron bath that needs restoring.
Every repair is covered by our one-year guarantee, wherever you are in Warwickshire.
- Location
- Churchover (CV23)
- County
- Warwickshire
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What we do, step by step
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take most of the day. We tidy up before we leave and tell you when it’s ready to use.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Clear the area around the damage
- Point us to the nearest place to park
- Avoid using the area for a few hours before we arrive
Getting a price
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and you will get a fixed price back. Quotes are free and no obligation.
Advice
Other services in Churchover
How to care for the repair
Aftercare is simple:
- Do not leave a chip unrepaired
- Wash away dyes and oils after use
- Don’t leave bottles, razors or sponges standing on the surface
- Stick to gentle, non-abrasive cleaners
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
Should you replace it?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. Compared with replacing, a repair is usually a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why Churchover clients choose us
- Fixed prices from your photos
- No need to remove anything
- We come to you, anywhere in the UK
- One visit for most repairs
See our pricing or resurfacing vs replacement cost guide.
When a repair is not the answer
A repair is not right for every job, including:
- Damage hidden under a previous coating, until it’s stripped back
- A bath that’s rusted through
- An acrylic bath that flexes badly underfoot
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we work on in Churchover
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
When to call us in Churchover
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, normally first under the taps and around the waste.
It’s worth getting a quote if you see:
- Chips and rust in more than one place
- A coloured bath you want in white
- An original cast iron bath that needs restoring
- A bath that stays dull however much you clean it
Comparing quotes
- How to care for the finish
- Whether there are any call-out or travel charges
- Whether cleaning and preparation are in the price
- How changes to the job are handled
Our work in Churchover
Churchover is about 4 miles north of Rugby, in Warwickshire. Wherever you are in the CV23 postcode area, a technician comes to you. We cover all 324 towns and villages in Warwickshire, from the larger towns to small villages. We work right across the region, from Churchover to Birmingham (27 miles away).
Here we cover the CV23 postcode area. Jobs here include addresses on School Street, Old Rectory Close and Church Street. Neighbouring places we cover include Cosford (2 miles south-west), Newton (2 miles south-east), Cotesbach (2 miles north-east), Shawell (2 miles east) and Harborough Magna (2 miles west). Further out, we also cover Rugby (4 miles south), Nuneaton (12 miles north-west), Royal Leamington Spa (15 miles south-west), Bedworth (11 miles west), Leamington Spa (15 miles south-west) and Kenilworth (15 miles west).
Around Churchover
We visit homes around Church of the Holy Trinity. Churchover’s nearest station is Rugby station, about 2.9 miles south. Further afield, we also cover the area around Monks Kirby Rural District (2.9 miles north-west) and Lilbourne Castle (3.7 miles south-east). Not far away are Swift Valley Nature Reserve.
Landlord and trade work in Churchover
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
If you manage property in Churchover, we can repair and quote for several addresses together. Send pictures for each one and we’ll price them together.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported.
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Churchover: your questions answered
Is a repair better than a new one?
Usually, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
How long will the bath be out of use?
Most baths are done in a day and can be used the day after. We will confirm timings when we quote.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Do you cover Churchover?
We do. We send a technician to Churchover for every job, with no extra charge for travel.
What information do you need?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Do you resurface freestanding baths?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
About our accreditations · Every repair comes with a one-year guarantee.
