Warwickshire · England
Bath chip & crack repair in Churchover, Warwickshire
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Churchover, with a one-year guarantee on every repair.
- Repairs from £95
- Impact holes in acrylic
- An old repair that has yellowed or come loose
Churchover and nearby
Churchover is about 4 miles north of Rugby, in Warwickshire. Anywhere in CV23, we come to you. Our repair technicians cover all 324 towns and villages across Warwickshire. We work right across the region, from Churchover to Birmingham (27 miles away).
Here we cover the CV23 postcode area. Jobs here include addresses on School Street, Old Rectory Close and Church Street. If you’re just outside Churchover, we cover Cosford (2 miles south-west), Newton (2 miles south-east), Cotesbach (2 miles north-east), Shawell (2 miles east) and Harborough Magna (2 miles west). We also work in nearby towns such as Rugby (4 miles south), Nuneaton (12 miles north-west), Royal Leamington Spa (15 miles south-west), Bedworth (11 miles west), Leamington Spa (15 miles south-west) and Kenilworth (15 miles west).
Near you in Churchover
Locally, our jobs take us to homes close to Church of the Holy Trinity and the streets around them. The closest station to Churchover is Rugby station, about 2.9 miles south of the centre. Well-known places in the area include Monks Kirby Rural District (2.9 miles north-west) and Lilbourne Castle (3.7 miles south-east). Not far away are Swift Valley Nature Reserve.
About our bath repair in Churchover
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in one visit. Typical jobs include chips under the taps and rusty patches near the plughole, in whirlpool & spa baths, roll-top & freestanding and cast iron enamel.
Whatever the size of the job, it’s backed by a one-year guarantee in Churchover and across Warwickshire.
- Where
- Churchover (CV23)
- Region
- Warwickshire
- Warranty
- 12 months on all our work
- Price
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Repairing versus replacing in Churchover
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it takes one visit, and the bathroom stays exactly as it is. Repairs from £95, with every job priced individually. A repair usually costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
What you get with us
- One-year guarantee on every repair
- Everything repaired in place
- Colour-matched on site
- We will tell you if it’s not worth repairing
Take a look at our prices page or resurfacing vs replacement cost guide.
More services for Churchover
Common questions in Churchover
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Can you repair a failed DIY repair?
Yes, we do this often. We strip it out, deal with any rust and repair it again.
Is a cracked acrylic bath repairable?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Can you redo someone else’s repair?
Typically, yes. We remove the old repair before doing a new one, so mention it when you send pictures.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
What happens after I send pictures?
We come back with a fixed quote. There is no obligation to book.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Keeping it looking good
Once the work has cured, treat it gently:
- Rinse it down after each bath
- Clean with warm water and a mild detergent
- Don’t leave razors or cans standing in the bath
- Keep abrasive pads and gritty cleaners away from the bath
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Remove it before the repair.
Do you need bath repair in Churchover?
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
The most common problems we’re called about are:
- A kit repair that didn’t last
- Hairline or through cracks in acrylic
- Scratches you can feel with a fingernail
- Rusty patches near the plughole
What your quote should include
- The length of the guarantee and what it covers
- Is the price fixed, and does it include VAT?
- Aftercare advice
- If travel is included in the price
The process
We work cleanly and quietly, so you can stay at home while we are there. We protect the area first, then the work takes two to three hours for most chips. At the end we talk you through how soon it can be used and how to look after it.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the next day.
Before we arrive
- Let us know about parking or access
- Let us know which floor the room is on
- Keep a parking space free if you can
Get a quote
Email us a picture of the damage and a wider shot of the entire item, with your CV23 postcode, and we will come back with a fixed quote.
Read more
Materials and what they mean for the repair
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
What we can’t put right
It helps to know what we cannot do too:
- A bath that moves underfoot, until its support is fixed
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Leaks from the waste or overflow fittings (a plumber’s job)
If in doubt, send photos and we will say what we think.
What we work on
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
What affects the price in Churchover
Repairs from £95. We give every job a fixed price from photos. This is what makes a difference:
- How many areas need work
- Access to the area
- Previous DIY repairs that have to come out
- The colour and finish to match
We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from photos
When you take your pictures, these tips help us give you a firm price:
- The material, if you know it
- One sharp close-up of the damage
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
About our accreditations · Every repair comes with a one-year guarantee.
