Ceredigion · Wales

Bath re-enamelling & resurfacing in Ciliau Aeron, Ceredigion

Bath re-enamelling for Ciliau Aeron, without a refit. Send us photos for a fixed quote, then we come to you.

  • Resurfacing from £350
  • An original cast iron bath that needs restoring
  • Lots of chips and rust spots
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Ciliau Aeron

Bath re-enamelling at your home in Ciliau Aeron

After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Whether it’s a coating lifting around the plughole and wear marks under the taps, we can generally put it right, on Victorian roll-tops, cast iron baths and basins & shower trays alike.

You get a one-year guarantee, the same in Ciliau Aeron as everywhere else we work.

Surface Doctor technician refinishing the outside of a roll-top bath
Area
Ciliau Aeron (SA48)
Region
Ceredigion
Guarantee
12 months on all our work
Quote
From £350. Free and fixed, from your pictures
Phone
0345 017 0787
Last updated
23 October 2026

Keeping it looking good

To keep it looking its best:

  • Repair dripping taps early
  • Have chips seen to early
  • Wipe the bath dry after use in hard water areas
  • Rinse off hair dye, oils and bath bombs straight away

Wipe the bath dry after use where you can, particularly with hard water, and rinse off any bath products.

Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.

What your bath is made of matters

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

Should you replace it?

Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. We charge the same wherever you are, so there’s no premium for Ciliau Aeron. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Why choose Surface Doctor in Ciliau Aeron

  • One visit for most repairs
  • One-year guarantee on every repair
  • Work done at your home or business
  • Honest advice, even when it means no job

Read our prices page or bath cost comparison.

Ciliau Aeron and nearby

Ciliau Aeron is about 25 miles north of Carmarthen, in Ceredigion. Wherever you are in the SA48 postcode area, a technician comes to you. Ciliau Aeron is one of 125 towns and villages in Ceredigion we cover.

All of SA48 is covered, from the main roads to the quietest streets. Jobs here include addresses on Maes Aeron and Heol Dolanog. We also cover the places around Ciliau Aeron: Tŷ Glyn (1 mile north), Pennant (3 miles north), Cross Inn (4 miles north-east), Rhos Haminiog (4 miles north-east) and Llannon (5 miles north). Larger places within reach include Aberystwyth (15 miles north), Trefechan (15 miles north), Aberaeron (3 miles north-west), Lampeter (8 miles south-east), Penparcau (14 miles north) and New Quay (7 miles west).

What’s near Ciliau Aeron

Locally, our jobs take us to homes close to Parish Church of St Michael. Nearby you will also find Bwlch y Castell (1.7 miles east) and Aberaeron Hospital (3.5 miles north-west). The countryside around Ciliau Aeron includes Parc yr Hydd.

Map of Ciliau Aeron © OpenStreetMap contributors

Prices and what affects them

Resurfacing from £350. We do not charge extra for travel to Ciliau Aeron. The price comes down to:

  • The material
  • Whether old repairs or coatings need taking off
  • The size and number of damaged areas
  • The type of damage

The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before booking.

How to get a fixed price

Photographing the damage takes a minute. Try to send:

  • A wider photo showing the entire bath
  • What it’s made of, if you know
  • A clear, close picture of the problem area
  • Any earlier repairs or coatings

There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

How the visit works

We agree an arrival time beforehand, so you’re not left guessing. Once we’re there, the work takes most of the day. We leave the room clean and you’ll know when it can be used.

  1. We sheet, mask and ventilate the room.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures until the day after.

Before we arrive

  • Let us know if it has been repaired before
  • Tell us if there are stairs or a lift
  • Have a window or extractor fan available

Getting a price

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote without visiting.

Send photos for a quote

Read more

DIY kit or professional repair?

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.

If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.

What we cannot put right

We’d rather lose a job than do one that will not last, so these are the limits:

  • Anything hidden under an old coating, until we remove it
  • Holes rusted through the metal
  • An acrylic bath that flexes badly underfoot

Send us photos and we will tell you honestly before you book.

What we work on

  • Basins & shower trays
  • Cast iron baths
  • Victorian roll-tops
  • Acrylic baths
  • Pressed steel baths

Do you need bath re-enamelling in Ciliau Aeron?

By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.

These are the problems we are asked about most:

  • A peeling or bubbling previous coating
  • A dull, rough surface that won’t come clean
  • Brown or grey marks that don’t clean off
  • Wear marks under the taps

What to look for in a quote

  • Whether the price covers travel
  • What protection goes down before work starts
  • What aftercare is recommended
  • What happens if they find more damage

Our hiring checklist

FAQs for Ciliau Aeron

I’m a tenant. Can you help?

We can work for tenants, landlords or agents. Just make sure the landlord agrees.

What if the damage is worse than the photos show?

The price is fixed for what the pictures show. If there is more, we’ll tell you before starting.

Does the bath have to be removed?

No. We resurface it in place, so nothing else is disturbed.

Do I have to be there?

We need someone to let us in. After that, you can carry on with your day.

Do you cover the whole of Ceredigion?

The entire UK, including all of Ceredigion. Send your postcode with your pictures and we’ll offer you dates.

How durable is a resurfaced bath?

It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.

Can you resurface a pink bath in white?

Yes, white is the usual choice. Mention the colour you want when you send pictures.

Are there extra charges for Ciliau Aeron?

We don’t add a call-out fee. The fixed quote covers the visit and the work.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.