Ceredigion · Wales

Bath Re-enamelling for Tŷ Glyn homes

Bath re-enamelling across Tŷ Glyn and nearby, done in a single visit in most cases and guaranteed for a year.

  • Resurfacing from £350
  • Worn patches where water runs and sits
  • A bath in a colour that no longer suits
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Tŷ Glyn?

Bath re-enamelling in Tŷ Glyn without replacing anything

After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. Typical jobs include a dull, rough surface that won’t come clean and a bath in a colour that no longer suits, in basins & shower trays, pressed steel baths and Victorian roll-tops.

Every repair comes with our one-year guarantee.

Where
Tŷ Glyn (SA48)
Region
Ceredigion
Warranty
A year, on every repair
Quotes
From £350. Fixed and free, based on pictures
Call
0345 017 0787
Last updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

Should I try a DIY kit first?

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

Aftercare tips

After the repair has cured, a few habits help it last:

  • Do not leave a chip unrepaired
  • Keep suction mats out of the bath
  • Wash away dyes and oils after use
  • Stick to gentle, non-abrasive cleaners

Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.

The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.

Work for landlords and builders

Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.

Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

Repairing versus replacing in Tŷ Glyn

Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. Our prices are the same across the UK, so there’s no premium for Tŷ Glyn. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Why us?

  • Work done at your home or business
  • Everything repaired in place
  • One visit for most repairs
  • CHAS, Constructionline and SafeContractor accredited

See our pricing and resurfacing vs replacement cost guide.

FAQs for Tŷ Glyn

How quickly can you book me in?

Your quote comes with available dates. Tell us if you need it done quickly.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as homeowners.

What if the damage is worse than the pictures show?

If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.

Can I get a quote without a visit?

Yes, almost always. A close-up and a wider photo are enough to give a fixed price.

Is there a smell?

A little, during the work. We set up ventilation and the smell fades as it cures.

Are there extra charges for Tŷ Glyn?

Travel is included in the price, and we charge the same wherever you are.

Do you work in Tŷ Glyn?

Yes. We cover the whole UK and travel to Tŷ Glyn. Send us pictures for a fixed quote, or call 0345 017 0787.

The process

We turn up when we said we would and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. Most visits take most of the day, and the room is left clean and tidy.

  1. First we look the bath over and confirm the finish.
  2. Everything around the bath is masked and covered.
  3. The bath is degreased, repaired and keyed.
  4. We apply the primer and then the finish coats.
  5. The masking comes off, we tidy up and tell you when it can be used.

How to prepare

  • Open a window if you can
  • Let us know about parking or access
  • Mention any earlier repairs or resurfacing

Getting a price

Send us pictures of the damage and one of the entire item, and tell us you are in Tŷ Glyn, and we’ll come back with a fixed quote.

Get a fixed price

Advice

Our work in Tŷ Glyn

Tŷ Glyn is about 14 miles south of Aberystwyth, in Ceredigion. Book a date that suits you, and you will know when to expect us, so there’s no waiting around. Our repair technicians cover 125 places across Ceredigion, from the larger towns to small villages.

Our technicians cover all of the SA48 postcode area. Other places close to Tŷ Glyn include Ciliau Aeron (1 mile south), Pennant (2 miles north-east), Cross Inn (4 miles north-east), Rhos Haminiog (4 miles north-east) and Llannon (5 miles north). Further out, we also cover Aberystwyth (14 miles north), Trefechan (14 miles north), Aberaeron (3 miles north-west), Lampeter (9 miles south-east), Penparcau (14 miles north-east) and New Quay (7 miles west).

Landmarks near Tŷ Glyn

Our clients here include homes close to Parish Church of St Michael and the streets around them. Other landmarks nearby include Llanerchaeron Museum (1.3 miles west) and Aberaeron Hospital (3.1 miles north-west). Green spaces nearby include Parc yr Hydd.

Map of Tŷ Glyn © OpenStreetMap contributors

When to call us in Tŷ Glyn

Hard water speeds up the wear, and abrasive cleaners do the most damage.

Keep an eye out for these signs:

  • An outdated colour you’d like to change
  • A period or roll-top bath worth keeping
  • Thin, worn enamel in places
  • Lots of chips and rust spots

Before you book anyone

  • Whether the price is fixed and includes VAT
  • Aftercare advice
  • The length of the guarantee and what it covers
  • Whether the price covers travel

Our hiring checklist

When a repair isn’t the answer

Some jobs are not right for a repair, for example:

  • Steel that has corroded right through
  • Acrylic that moves when you stand in it
  • Plumbing leaks, which need a plumber

Not sure? Send pictures and we’ll give you a straight answer.

What we work on

  • Basins & shower trays
  • Pressed steel baths
  • Victorian roll-tops
  • Acrylic baths
  • Cast iron baths

Repairs by material

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.