Leicestershire · England
Bath Re-enamelling for Claybrooke Parva homes
Damaged bath in Claybrooke Parva? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- A period or roll-top bath worth keeping
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Bath re-enamelling in Claybrooke Parva, done in place
The bath stays where it is, so the taps, tiles and plumbing are not touched. It generally takes one visit, with the bath ready to use the following day. Our technicians work on pressed steel baths, basins & shower trays and acrylic baths, and people most often call us about worn patches where water runs and sits and enamel that’s lost its shine and feels rough.
You get a one-year guarantee, the same in Claybrooke Parva as everywhere else we work.
- Location
- Claybrooke Parva (LE17)
- Region
- Leicestershire
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairing versus replacing in Claybrooke Parva
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Why book with us
- Every repair guaranteed for a year
- Dust sheets down, tidy finish
- A fixed quote before you book
- Colour mixed on the day to match
Take a look at our prices page and bath cost comparison.
What bath re-enamelling costs
Resurfacing from £350. Every quote is fixed and free. What we look at:
- The size and number of damaged areas
- Doing more than one item at once
- Previous DIY repairs that have to come out
- What kind of damage it is
Compared with replacing, a repair is usually a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Quotes from your photos
Two or three clear pictures are typically enough. Try to include:
- The material, if you know it
- Something in shot to show the size
- A picture taken from further back
- A clear, close picture of the problem area
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed quote back. Quotes are free and you’re under no obligation.
What we cannot put right
Before you book, it’s worth knowing the limits too:
- Anything hidden under an old coating, until we remove it
- A bath that’s rusted through
- Leaks from fittings rather than the bath
Not sure? Send pictures and we will give you a straight answer before booking.
What we work on
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
Your questions about bath re-enamelling in Claybrooke Parva
It’s been repaired before. Can you still fix it?
Usually, yes. We remove the old repair before doing a new one, so mention it when you send photos.
Do the materials smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum.
What happens next?
We come back with a fixed quote. You’re under no obligation.
Are there extra charges for Claybrooke Parva?
We do not add a call-out fee. Your fixed quote includes everything.
How do I book?
Send pictures through the quote form or call 0345 017 0787, and we will take it from there.
Does re-enamelling smell?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
How long is the bath unusable?
Most baths are done in a day, ready the next day. We give you timings with the quote.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Towns and villages near Claybrooke Parva
Also in Claybrooke Parva
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Landlord and trade work in Claybrooke Parva
We work for landlords, letting agents and housing providers in Claybrooke Parva as well as householders. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
If you manage property in Claybrooke Parva, we can repair and quote for several addresses together. Send photos for each one and we will price them together.
Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- Leave the bath for the full curing time before using it
- Don’t let dyes or oils sit on the finish
- Keep suction mats out of the bath
- Have chips seen to early
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Covering Claybrooke Parva
Claybrooke Parva is about 5 miles south-east of Hinckley, in Leicestershire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Claybrooke Parva is one of 287 towns and villages in Leicestershire we cover. You can also see our page for Birmingham, about 26 miles away.
Our visits in LE17 work the same way as everywhere else we cover. Jobs here include addresses on Main Road, Clay Brooke Court and Western Drive. Nearby, we also work in Claybrooke Magna (1 mile north), Ullesthorpe (1 mile east), Wibtoft (1 mile west), High Cross (1 mile west) and Ashby Parva (2 miles east). Larger places within reach include Hinckley (5 miles north-west), Wigston (10 miles north-east), Lutterworth (3 miles south-east), Blaby (7 miles north-east), Broughton Astley (4 miles north-east) and Earl Shilton (6 miles north).
What’s near Claybrooke Parva
Locally, our jobs take us to homes close to Church of St Peter and Claybrooke Primary School. Nearby you’ll also find Monks Kirby Rural District (2.9 miles south-west) and Lutterworth and District Museum (3.8 miles south-east). Green spaces nearby include Stoney Cove.
What happens on the day
Here’s how a visit usually runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Plan for a full day from start to finish. Before we go, we will explain how long to leave it and how to care for it.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Keep children and pets away from the room on the day
- Mention any parking restrictions or tricky access
- Let the surface dry out before the visit
Getting a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
