Oxfordshire · England
Bath re-enamelling & resurfacing in Clifton, Oxfordshire
Bath re-enamelling in Clifton without the cost of replacing. Send us photos for a fixed quote, then book a visit.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- A peeling or bubbling previous coating
Questions from Clifton
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
What do you need from me?
Send photos through the quote form or call 0345 017 0787, and we’ll take it from there.
Can I add another job to the visit?
Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.
Do you charge for travel?
There is no separate call-out charge. Your fixed price includes everything.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
How quickly can you book me in?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
About our bath re-enamelling in Clifton
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It’s the answer when the entire bath is tired rather than one spot. If you’re dealing with a coating lifting around the plughole and lots of chips and rust spots, we can generally put it right, whatever the material.
Every repair is covered by a one-year guarantee, wherever you are in Oxfordshire.
- Area
- Clifton (OX15)
- Region
- Oxfordshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Signs you need bath re-enamelling in Clifton
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Typical reasons for a call-out include:
- A roll-top that is seen better days
- An outdated colour you’d like to change
- Thin, worn enamel in places
- An old resurfacing that’s failing
Before booking anyone
- Whether a trained technician does the job
- Whether the price covers travel
- When it can be used again
- What happens if they find more damage
Clifton and nearby
Clifton is about 6 miles south-east of Banbury, in Oxfordshire. Whether you’re in the middle of Clifton or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Our repair technicians cover all 443 towns and villages in Oxfordshire. Our nearest city page is Birmingham, about 42 miles away.
Postcode districts we cover here: OX15. That includes homes on County View, Tithe Lane and Clifton Road. We also cover the places around Clifton: Aynho (2 miles north-east), Somerton (2 miles south), Souldern (2 miles east), Fritwell (3 miles south-east) and Croughton (4 miles east). Larger places within reach include Banbury (6 miles north-west), Bicester (8 miles south-east), Kidlington (11 miles south), Bure Park (8 miles south-east), Chipping Norton (11 miles west) and Headington (15 miles south).
What’s near Clifton
In Clifton, that means homes near Duke Of Cumberlands Head Public House, among other places. The nearest railway station is Kings Sutton station, roughly 2.7 miles north of the centre. Other landmarks nearby include Horton General Hospital (5.3 miles north) and Deddington Castle (1.1 miles west).
When a repair is not the answer
It helps to know what we can’t do:
- Leaks from fittings rather than the bath
- An acrylic bath that flexes badly underfoot
- A bath that’s rusted through
Not sure? Send pictures and we will give you a straight answer before you book.
What we work on
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
The process
Arrival times are agreed in advance, so you know when to expect us. On site, it takes the best part of a day in most cases. We leave the room clean and ready to use once it has cured.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Let us know which floor the room is on
- Mention any parking restrictions or tricky access
- Let the surface dry out before the visit
Ask for a price
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Advice
Aftercare tips
To keep it looking its best for years:
- Have chips seen to early
- Avoid suction-cup mats
- Wash away dyes and oils after use
- Clean with a soft cloth and mild detergent
Wipe the bath dry after use where you can, and rinse away any product left on the surface.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
More services for Clifton
Why repair rather than replace?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, so there’s no premium for Clifton. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why book with us
- We will tell you if it’s not worth repairing
- A fixed quote before you book
- Colour-matched on site
- Every repair guaranteed for a year
See our pricing and guide to resurfacing and replacement costs.
What bath re-enamelling costs
Prices start from £350. There is no area surcharge for Clifton. The price reflects:
- How much damage there is
- What kind of damage it is
- Access to the area
- The material
There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Send photos for a quote
We price nearly every job from pictures. This is what to send:
- Any earlier repairs or coatings
- A photo taken from further back
- The material, if you know it
- The postcode, so we can plan the visit
To get a price, send a couple of pictures through our quote form or call us. We will tell you honestly whether it can be repaired.
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
About our accreditations · Every repair comes with a one-year guarantee.
