Herefordshire · England
Bath Re-enamelling in Clyro
Bath re-enamelling in and around Clyro: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Chips and rust in more than one place
- Wear marks under the taps
Clyro questions
How do I get a price for bath re-enamelling in Clyro?
Prices start from £350. Every job gets a fixed price from your pictures. Send a close-up and a photo of the entire item and your postcode.
How do I book?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
Can you price it without visiting?
In nearly every case. If photos do not show enough, we will ask for another angle.
How quickly can you book me in?
That depends on our diary for your area. We will offer you dates when we send your quote.
Do you cover Clyro?
Yes, we do. We send a technician to Clyro for every job, and the price is the same as everywhere else.
Can tenants book a repair?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Bath re-enamelling in Clyro without replacing anything
Most baths are re-enamelled in a day, and you can use the bath the day after. Taps, tiles, panels and plumbing all stay in place. Our technicians work on cast iron baths, basins & shower trays and pressed steel baths, and the jobs we see most are several chips and rust patches and a peeling or bubbling previous coating.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we will sort it.
- Location
- Clyro (HR3)
- County
- Herefordshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Honest limits
Not everything can be repaired, and we will tell you before we start. Repairs will not solve:
- An acrylic bath that flexes badly underfoot
- Leaks from fittings rather than the bath
- Holes rusted through the metal
Send us pictures and we’ll tell you honestly.
Materials we repair
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
Common problems we fix in Clyro
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
If you can see any of these, send us a picture:
- Enamel that is lost its shine and feels rough
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
- Staining under the taps and around the waste
Before you book anyone
- Who will actually do the work
- What the guarantee covers, and for how long
- Is the price fixed, and does it include VAT?
- Whether the colour is mixed to match
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
Covering Clyro
Clyro (also: Cleirwy) is about 18 miles west of Hereford, in Herefordshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in 255 places across Herefordshire. Our jobs stretch from Clyro to Birmingham (about 59 miles away).
Here we cover the HR3 postcode area. Jobs here include addresses on Dan-y-Castell, Buttercup Meadow and Castle Estate. Neighbouring places we cover include Hay (1 mile south-east), Y Gelli Gandryll (1 mile south-east), Cusop (2 miles south-east), Llanigon (2 miles south) and Glasbury (4 miles south-west). Larger places within reach include Kington (10 miles north-east), Credenhill (15 miles east), Clehonger (15 miles east), Weobley (13 miles north-east) and Kingstone (14 miles east).
Local landmarks in Clyro
Our customers here include homes close to St Michael and All Angels' Church and the streets around them. Well-known places in the area include Clyro Castle (under half a mile south). Green spaces nearby include Glasbury oxbow and Monk's Well Hill.
What we do, step by step
Your technician turns up when we said we would and checks the damage against your pictures first. Dust sheets and masking tape go down before any work starts. Most visits take most of the day, and we leave the room as we found it.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Move bottles, mats and clutter away from the area
- Make sure the room can be ventilated
- Let us know if it has been repaired before
Get a quote
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and you are under no obligation.
Related advice
Keeping it looking good
Looking after the surface is easy, and it makes a real difference:
- A quick wipe after use keeps limescale away
- Have chips seen to early
- Keep suction mats out of the bath
- Store bottles off the bath
Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
Landlords, agents and businesses in Clyro
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
Also in Clyro
How we price bath re-enamelling
Resurfacing from £350. We give every job a fixed quote from photos. This is what makes a difference:
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
- Doing more than one item at once
The price reflects the work involved, not your postcode. The full price is agreed before booking, with nothing added on the day.
Send photos for a quote
Most quotes are done from pictures alone. To make it quick:
- A close-up of the damage, in focus
- One picture of the whole bath
- A coin beside the damage so we can judge size
- Good light, ideally daylight, without flash glare
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
About our accreditations · Every repair comes with a one-year guarantee.
