Newcastle upon Tyne · England

Bath Re-enamelling in Cochrane Park

Bath re-enamelling for Cochrane Park, without a refit. Get a fixed quote from your photos, then we come to you.

  • Resurfacing from £350
  • Enamel that’s lost its shine and feels rough
  • An original cast iron bath that needs restoring
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Cochrane Park

About our bath re-enamelling in Cochrane Park

A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. We’re frequently asked to fix a bath in a colour that no longer suits and thin, worn enamel in places, in acrylic baths, cast iron baths and Victorian roll-tops.

All our work comes with our one-year guarantee.

Where
Cochrane Park (NE7, NE6, NE98)
County
Newcastle upon Tyne
Guarantee
12 months on all our work
Price
From £350. Fixed and free, based on pictures
Call
0345 017 0787
Page updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Repair or replace: which is better?

If the bath is sound, re-enamelling is usually much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, so there is no premium for Cochrane Park. The job itself decides the price: how much damage, what it’s made of and how many items.

What you get with us

  • Fixed prices from your pictures
  • Work done at your home or business
  • One price list for the whole UK
  • Accredited with CHAS, Constructionline and SafeContractor

See our prices page and bath cost comparison.

Can I fix it myself?

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

Signs you need bath re-enamelling in Cochrane Park

In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.

The most common problems we are called about are:

  • A bath that stays dull however much you clean it
  • Staining under the taps and around the waste
  • An outdated colour you’d like to change
  • Wear marks under the taps

Comparing quotes

  • Aftercare advice
  • How changes to the job are handled
  • How soon you can use it again
  • Is the price fixed, and does it include VAT?

Choosing a repair company

How we price bath re-enamelling

Resurfacing from £350. A fixed quote means you know the cost before you book. We take into account:

  • How many items we do on one visit
  • Previous DIY repairs that have to come out
  • Where the damage is and how we get to it
  • Whether it’s a chip, crack, burn or wear

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Quotes from your pictures

When you take your pictures, these tips help us give you a firm price:

  • Any details about the material
  • Your postcode, so we can check dates
  • Natural light rather than flash
  • A coin beside the damage so we can judge size

Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you’ll get a fixed quote back. Quotes are free and you are under no obligation.

Honest limits

A few problems are outside what a surface repair can do:

  • A poorly supported acrylic bath, until it’s firmed up
  • A cast iron or steel bath that is cracked right through
  • A bath that’s rusted through

If in doubt, send photos and we will say what we think.

Materials we work on in Cochrane Park

  • Acrylic baths
  • Basins & shower trays
  • Victorian roll-tops
  • Pressed steel baths
  • Cast iron baths

Our work in Cochrane Park

Cochrane Park is about 2 miles south of Longbenton, in Newcastle upon Tyne. Our technicians come to homes and businesses in Cochrane Park, so nothing has to leave your home. Cochrane Park is one of 63 towns and villages in Newcastle upon Tyne where we work.

Our repair technicians cover all of the NE7, NE6 and NE98 postcode area and the streets around it. From Coast Road, Benton Road and Redcar Road or a nearby road, we can come to you. Main roads around Cochrane Park include the A188, so getting to you is simple. If you are just outside Cochrane Park, we cover Heaton (1 mile south), Cradlewell (1 mile south-west), Walkergate (1 mile south-east), Shieldfield (2 miles south-west) and Walker (2 miles south-east). Further out, we also cover Newcastle upon Tyne (3 miles west), Bensham (4 miles south-west), Carr Hill (3 miles south), Denton (5 miles west), Slatyford (4 miles west) and Low Fell (5 miles south).

What’s near Cochrane Park

Typical jobs here are in homes near Castle Leazes, Ravenswood Primary School and St Mary's Catholic Comprehensive School, among other places. Other local landmarks include Heaton Manor School (0.7 miles west), Corner House (0.6 miles south-west), Church of St Gabriel and Hall Attached (0.7 miles south-west) and Newcastle University Library (1.9 miles south-west). The closest station to Cochrane Park is Manors station, about 2.1 miles south-west of the centre. A little further out are intu Eldon Square (2.2 miles south-west) and Walkergate Park Hospital (0.7 miles south-east). The countryside around Cochrane Park includes Bent Hill and Havannah Nature Reserve.

  • Parks and local facilities nearby include North Heaton (within half a mile west)
Map of Cochrane Park © OpenStreetMap contributors

Aftercare tips

Looking after the surface is easy, and it makes a real difference:

  • Fix dripping taps quickly
  • Never use suction bath mats
  • Get any chip repaired quickly
  • Keep toiletries on a shelf rather than in the bath

Stick to mild, non-abrasive cleaners, do not use suction bath mats, and don’t leave bottles or razors standing on the surface.

If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.

For landlords and businesses

If you manage property in Cochrane Park, we can repair and quote for several addresses together. Send pictures for each one and we will come back with a combined price.

Landlords, letting agents and housing providers in Cochrane Park use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

Your questions about bath re-enamelling in Cochrane Park

Is it worth repairing rather than replacing?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.

Do you work in Cochrane Park?

Yes. We cover the entire UK and come to Cochrane Park. Send us pictures for a fixed quote, or call 0345 017 0787.

What areas do you cover?

Everywhere in the UK, Cochrane Park included. There is no extra charge for travel.

Can you redo someone else’s repair?

In most cases. We remove the old repair before doing a new one.

Does re-enamelling smell?

There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.

What does bath re-enamelling cost?

Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.

Will the bath be moved?

No. We resurface it in place, so the tiles and taps stay put.

Can you do the outside of a roll-top?

Yes. We can do the inside and outside.

How the visit works

We turn up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. Most visits take a full day, and the room is left clean and tidy.

  1. The room is masked, protected and ventilated.
  2. Next we degrease the bath and fix chips and rust spots.
  3. The surface is prepared and a bonding primer applied.
  4. We spray several coats of new enamel finish.
  5. The bath is left to cure and can generally be used the following day.

How to prepare

  • Clear the area around the damage
  • Ensure the area is dry
  • Keep children and pets away from the room on the day

Getting a price

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them to us. You will get a fixed price, not an estimate.

Get a free quote

Read more

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.