South Gloucestershire · England
Bath Re-enamelling in Codrington
Full bath re-enamelling and resurfacing in Codrington, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A coating lifting around the plughole
- Thin, worn enamel in places
Bath re-enamelling in Codrington, done in place
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. We regularly repair acrylic baths, Victorian roll-tops and cast iron baths, and common reasons people get in touch are an original cast iron bath that needs restoring and worn patches where water runs and sits.
A one-year guarantee comes as standard.
- Location
- Codrington (BS37)
- Area hub
- South Gloucestershire
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Wash away dyes and oils after use
- A quick wipe after use keeps limescale away
- Avoid suction-cup mats
- Store bottles off the bath
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
For landlords and businesses
We regularly work with letting and managing agents. Send the address, photos and access details and we will handle the rest.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
About Codrington
Codrington is about 3 miles south of Yate, in South Gloucestershire. We visit homes and businesses in Codrington and the surrounding area, so nothing has to leave your home. We work in all 110 towns and villages across South Gloucestershire, from the larger towns to small villages. You can also see our page for Birmingham, about 70 miles away.
All of BS37 is within our area, from the main roads to the quietest streets. Nearby, we also work in Dodington (2 miles north-east), Coomb's End (2 miles north-east), Chipping Sodbury (2 miles north), Old Sodbury (2 miles north-east) and Tormarton (3 miles east). Within a short drive, we also cover Kingswood (6 miles south-west), Mangotsfield (4 miles west), Yate (3 miles north), Fishponds (6 miles west), Bradley Stoke (7 miles west) and Thornbury (9 miles north-west).
Near you in Codrington
Our clients here include homes close to Chipping Sodbury School, Church of St Peter and The Wishing Well pub and the streets around them. For rail, the closest station is Yate station, about 2.8 miles north-west. A little further out are Frenchay Hospital (5.7 miles west) and Dodington Carriage Museum (1.2 miles north).
Why repair rather than replace?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, usually one day, and the bath is usable the day after. Our bath re-enamelling starts from £350. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why us?
- CHAS and Constructionline accredited
- Technicians who travel to you, UK-wide
- Rooms protected and left tidy
- Free fixed quotes from pictures
Take a look at our prices page or bath cost comparison.
What we’re called out for in Codrington
Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, usually first under the taps and around the waste.
These are the problems we’re asked about most:
- Chips and rust in more than one place
- Thin, worn enamel in places
- An original cast iron bath that needs restoring
- A dull, rough surface that won’t come clean
Comparing quotes
- Is the price fixed, and does it include VAT?
- When it can be used again
- What aftercare is recommended
- If travel is included in the price
How we price bath re-enamelling
Prices start from £350. We do not charge extra for travel to Codrington. The price comes down to:
- Access to the area
- How many areas need work
- The type of damage
- What the surface is made of
Our prices are the same across the UK, so there is no premium for Codrington. The job itself decides the price: how much damage, what it’s made of and how many items.
Send pictures for a quote
Almost every job we do is priced from pictures. This is what we need:
- Whether it’s been repaired or coated before
- The postcode, so we can plan the visit
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
If you are in Codrington and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Common questions in Codrington
Can you repair something that is been repaired before?
Generally, yes. Tell us what was done before.
What does bath re-enamelling cost?
Resurfacing from £350. Every job gets a fixed price from your photos. Send a close-up and a photo of the entire item and your postcode.
What information do you need?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Do you resurface freestanding baths?
Yes. We can do the inside and outside.
Will the new finish last?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
What happens after I send pictures?
You will get a fixed quote back, usually with dates to choose from. There is no obligation to book.
Is there a smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Also near Codrington
More services for Codrington
How the visit works
We begin by going over the job with you, so you know exactly what we are doing. Then the area is sheeted and masked and the work begins. Allow the best part of a day, and we will keep you posted as we go.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can generally be used the next day.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Have a window or extractor fan available
- Keep a parking space free if you can
Getting a price
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and you are under no obligation.
Read more
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
About our accreditations · Every repair comes with a one-year guarantee.
