South Gloucestershire · England
Bath re-enamelling & resurfacing in Bradley Stoke, South Gloucestershire
Bath re-enamelling in and around Bradley Stoke: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Worn patches where water runs and sits
Bath re-enamelling in Bradley Stoke without replacing anything
Resurfacing renews the whole surface of the bath without taking anything out. It’s the answer when the entire bath is tired rather than one spot. Typical jobs include a roll-top that’s seen better days and an outdated colour you’d like to change, on Victorian roll-tops, basins & shower trays and pressed steel baths.
A one-year guarantee comes as standard.
- Location
- Bradley Stoke (BS32, BS34, BS16)
- Region
- South Gloucestershire
- Guarantee
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
For landlords and businesses
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Landlords, letting agents and housing providers in Bradley Stoke use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Bradley Stoke and nearby
Bradley Stoke is about 4 miles north-west of Mangotsfield, in South Gloucestershire. Anywhere in BS32, a technician comes to you. Bradley Stoke is one of 110 towns and villages in South Gloucestershire we cover. Our jobs stretch from Bradley Stoke to Birmingham (about 71 miles away).
Here we cover the BS32, BS34 and BS16 postcode area. We regularly work on streets such as Station Road, Jordan Walk and Blackthorn Drive and the roads around them. Bradley Stoke sits on or near the B4057, so getting to you is simple. Other places close to Bradley Stoke include Stoke Lodge (1 mile south-west), Little Stoke (1 mile south-west), North Fringe of Bristol (1 mile south-west), Great Stoke (1 mile south-east) and Patchway (1 mile west). Further out, we also cover Kingswood (6 miles south-east), Mangotsfield (4 miles south-east), Yate (6 miles east), Fishponds (4 miles south), Thornbury (6 miles north) and Morton (6 miles north). As one of the bigger places in South Gloucestershire, Bradley Stoke is somewhere we visit often.
Local landmarks in Bradley Stoke
Around Bradley Stoke, we work in homes near Bradley Stoke Community School, Three Brooks Local Nature Reserve and Meadowbrook Primary School. The closest station to Bradley Stoke is Patchway station, about 0.6 miles south-west. A little further out are Stoke Park Hospital (2.5 miles south) and Frenchay Village Museum (2.6 miles south). For a walk, there’s Tarn Lake and Purdown.
What a repair can’t fix
A repair isn’t right for every job, for example:
- Leaks from fittings rather than the bath
- A poorly supported acrylic bath, until it’s firmed up
- Anything hidden under an old coating, until we remove it
Send us pictures and we will tell you honestly before you book.
What we work on
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
What we’re called out for in Bradley Stoke
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
Most people contact us when they notice something like this:
- Stains that will not shift
- Lots of chips and rust spots
- A period or roll-top bath worth keeping
- A peeling or bubbling previous coating
Before booking anyone
- What protection goes down before work starts
- How long the guarantee is and what it covers
- Whether the colour is mixed to match
- Whether the price covers travel
Prices and what affects them
Prices start from £350. We price every job individually. What matters most is:
- How hard the colour is to match
- Whether old repairs or coatings need taking off
- The material
- How much damage there is
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Quotes from your pictures
Photographing the damage takes a minute, and it saves a visit. Try to send:
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
- Your postcode, so we can check dates
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Your questions about bath re-enamelling in Bradley Stoke
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders across South Gloucestershire.
Is the work guaranteed?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
The process
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. Most visits take a full day.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s typically ready the following day.
How to prepare
- Have somewhere for us to park nearby if possible
- Tell us about any previous repairs or coatings
- Tell us about parking, stairs or access
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Related advice
Repair or replace: which is better?
Replacing a bath usually involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Our bath re-enamelling starts from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why Bradley Stoke clients choose us
- Accredited with CHAS, Constructionline and SafeContractor
- A fixed quote before you book
- Technicians who travel to you, UK-wide
- Straight answers about what a repair can do
Read our pricing and bath cost comparison.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Also near Bradley Stoke
Other services in Bradley Stoke
Aftercare tips
Nothing complicated is needed:
- Wash away dyes and oils after use
- A dripping tap should be fixed promptly
- A quick wipe after use keeps limescale away
- Respect the curing time we give you
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
About our accreditations · Every repair comes with a one-year guarantee.
