Essex · England
Bath Re-enamelling in Colchester
Fixed-price bath re-enamelling in Colchester and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- Staining under the taps and around the waste
- A dull, rough surface that won’t come clean
Keeping it looking good
So the finish stays in good condition:
- Use washing-up liquid and a soft cloth
- Do not use the bath until it has fully cured
- Keep suction mats out of the bath
- Repair dripping taps early
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
How we handle bath re-enamelling in Colchester
The bath stays where it is, so your taps, tiles and plumbing are left alone. It normally takes one visit, and can be used again the next day. Typical jobs include brown or grey marks that don’t clean off and a period or roll-top bath worth keeping, on Victorian roll-tops, pressed steel baths and basins & shower trays.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
Signs you need bath re-enamelling in Colchester
Hard water speeds up the wear, and abrasive cleaners do the most damage.
You may need us if you’ve spotted:
- Thin, worn enamel in places
- An outdated colour you’d like to change
- Chips and rust in more than one place
- A dull, rough surface that will not come clean
What your quote should include
- What happens if they find more damage
- How soon you can use it again
- Whether a trained technician does the job
- Aftercare advice
Landlord and trade work in Colchester
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Materials and what they mean for the repair
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Our work in Colchester
Colchester is in Essex. From the centre of Colchester to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. We work in 644 places in Essex. Our jobs stretch from Colchester to London (about 50 miles away).
Jobs in CO4, CO3, CO2 and CO1 are booked in the same way as anywhere else. Whether you live on High Street, North Station Road and Durham Square or a nearby road, we can come to you. You will find Colchester on the A12 and A120, so it’s easy for us to reach. Close by, we cover Camulodunum (1 mile west), Braiswick (1 mile west), Abbey Field (1 mile south), Lexden (1 mile west) and Beacon End (3 miles west). Larger places within reach include Braintree (14 miles west), Clacton-on-Sea (12 miles south-east), Maldon (15 miles south-west), Witham (13 miles south-west), Halstead (12 miles west) and Heybridge (14 miles south-west). Colchester is one of the larger places we cover in Essex.
Local landmarks in Colchester
Locally, our jobs take us to homes close to Church of St Peter, Bull Meadow and The Bay And Say Public House. Other local landmarks include Colchester Sixth Form College (under half a mile north-west) and St John's Green Primary School (less than half a mile south). There’s a railway station in Colchester itself: Colchester Town station. A little further out are Lion Walk (within half a mile south-east) and Essex County Hospital (within half a mile south-west). Green spaces nearby include Westhouse Wood.
The process
We begin by going over the job with you, so there are no surprises. Next, we cover and mask everything nearby and the work begins. Allow the best part of a day, and we will keep you posted as we go.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Let us know which floor the room is on
- Let the surface dry out before the visit
- Let us know if it has been repaired before
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Related advice
FAQs for Colchester
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Can you quote from pictures?
Usually, yes. A close-up and a wider photo are enough to give a fixed quote.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Can you fix a peeling bath coating?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
When a repair is not the answer
Some problems need a builder, plumber or fitter rather than us:
- Acrylic that moves when you stand in it
- A metal bath with a through crack
- Leaks from fittings rather than the bath
Send us photos and we will tell you honestly before booking.
Materials we repair
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
Why repair rather than replace?
Replacing a bath usually involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and typically one day, and the bath can be used the day after. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Why us?
- CHAS and Constructionline accredited
- One-year guarantee on every repair
- We come to you, anywhere in the UK
- Dust sheets down, tidy finish
See our prices page and resurfacing vs replacement cost guide.
Nearby places to Colchester
Also in Colchester
Can I fix it myself?
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it fails, we can still put it right.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
