Rutland · England
Bath Re-enamelling for Cold Overton homes
Problem with your bath in Cold Overton? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Stains that won’t shift
- A bath that stays dull however much you clean it
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
About our bath re-enamelling in Cold Overton
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, and can be used again the next day. We regularly repair cast iron baths, acrylic baths and pressed steel baths, and people most frequently call us about a bath that stays dull however much you clean it and a bath in a colour that no longer suits.
A one-year guarantee comes as standard, so you are covered after the visit.
- Location
- Cold Overton (LE15)
- Area hub
- Rutland
- Guarantee
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Keeping it looking good
Much of the damage we repair could have been avoided. These habits help:
- Leave the bath for the full curing time before using it
- A dripping tap should be fixed promptly
- Don’t leave a chip unrepaired
- Keep suction mats out of the bath
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Landlords, agents and businesses in Cold Overton
For anyone letting property in or around Cold Overton, we’ll quote for several properties at once. Send photos for each one and we will price them together.
Landlords, letting agents and housing providers in Cold Overton use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Why repair rather than replace?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
What you get with us
- We come to you, anywhere in the UK
- One-year guarantee on every repair
- Colour mixed on the day to match
- Rooms protected and left tidy
See our prices page and guide to resurfacing and replacement costs.
FAQs for Cold Overton
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you resurface a pink bath in white?
Yes, most people go for white. Mention the colour you want when you send pictures.
How much does bath re-enamelling cost in Cold Overton?
Prices start from £350. We give a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Is there a guarantee?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Towns and villages near Cold Overton
More services for Cold Overton
How the visit works
Arrival times are agreed in advance. On site, it takes most of the day in most cases. We leave the room clean and ready to use once it has cured.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s normally ready the day after.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Tell us if there are stairs or a lift
- Plan for the room to be out of bounds to pets and children
Getting a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
What affects the price in Cold Overton
Resurfacing from £350. We price every job individually. The main factors are:
- The type of damage
- Any earlier repairs that need removing first
- What the surface is made of
- Whether we combine several jobs
We charge the same wherever you are, with no extra for Cold Overton. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what we need:
- Any earlier repairs or coatings
- The postcode, so we can plan the visit
- A coin or ruler next to the damage for scale
- A wider photo showing the whole bath
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Covering Cold Overton
Cold Overton is about 3 miles west of Oakham, in Rutland. From the centre of Cold Overton to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Cold Overton is one of 47 places in Rutland where we work. Our nearest city page is Birmingham, about 48 miles away.
Our repair technicians cover all of LE15. Other places close to Cold Overton include Knossington (1 mile south-west), Pickwell (2 miles north-west), Somerby (2 miles west), Owston (3 miles south-west) and Newbold (3 miles west). Within a short drive, we also cover Oakham (3 miles east), Uppingham (7 miles south-east), Cottesmore (6 miles east), North Luffenham (9 miles south-east) and Whissendine (3 miles north).
Near you in Cold Overton
We visit homes around Church of St John the Baptist and Cold Overton Park, among other places. The closest station to Cold Overton is Oakham station, about 3 miles east of the centre. Well-known places in the area include Sauvey Castle (3.4 miles south-west).
Repairs by material
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
What a repair can’t fix
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Acrylic that moves when you stand in it
- Anything hidden under an old coating, until we remove it
- Leaks from fittings rather than the bath
If in doubt, send photos and we’ll say what we think before you book.
Materials we work on in Cold Overton
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
