Devon · England
Bath re-enamelling & resurfacing in Colebrook, Devon
Full bath re-enamelling and resurfacing in Colebrook, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Chips and rust in more than one place
Do you need bath re-enamelling in Colebrook?
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Most people contact us when they notice one of these:
- An original cast iron bath that needs restoring
- Thin, worn enamel in places
- Lots of chips and rust spots
- A peeling or bubbling previous coating
What your quote should include
- What the guarantee covers, and for how long
- What happens if they find more damage
- Aftercare advice
- A fixed quote, and whether VAT is included
Bath re-enamelling in Colebrook without replacing anything
Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. Typical jobs include chips and rust in more than one place and an original cast iron bath that needs restoring, across pressed steel baths, basins & shower trays and cast iron baths.
A one-year guarantee comes as standard.
- Where
- Colebrook (EX15)
- Area hub
- Devon
- Guarantee
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What happens on the day
Your technician turns up at the time we agreed with you, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. The work itself takes the best part of a day, and the room is left clean and tidy.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the next day.
Before we arrive
- Let us know which floor the room is on
- Have a window or extractor fan available
- Mention any parking restrictions or tricky access
Getting a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.
Advice
How we price bath re-enamelling
Resurfacing from £350. We price every job individually, from your photos. The main factors are:
- Unusual colours or finishes
- Previous DIY repairs that have to come out
- How easy the damage is to reach
- The material
The price reflects the work involved, not your postcode. The full price is agreed before booking.
Quotes from your pictures
You can take the pictures on your phone. Just make sure we can see:
- One sharp close-up of the damage
- A coin or ruler next to the damage for scale
- Details of any past repairs
- Your postcode, so we can check dates
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Nearby places to Colebrook
Also in Colebrook
What we can’t put right
Before booking, it’s worth knowing the limits:
- Damage hidden under a previous coating, until it’s stripped back
- Leaking taps or wastes (a plumber’s job)
- A bath that is rusted through
Send us pictures and we’ll tell you honestly before booking.
Surfaces we repair
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Colebrook and nearby
Colebrook is about 5 miles south-east of Tiverton, in Devon. Anywhere in EX15, we carry out the work at your property. We cover 586 places in Devon, from the larger towns to small villages.
All of EX15 is covered. Neighbouring places we cover include Ponsford (1 mile north-west), Cullompton (1 mile north-east), Stoneyford (2 miles north-east), Bradninch (2 miles south) and Hele (2 miles south). Larger places within reach include Exeter (10 miles south-west), Exmouth (15 miles south), Tiverton (5 miles north-west), Sidmouth (13 miles south-east), Honiton (10 miles east) and St Thomas (11 miles south-west).
Landmarks near Colebrook
Our clients here include homes close to Willowbank Primary School, Cullompton Community College and Parish Church of St Andrew and the streets around them. Other landmarks nearby include Bradninch Castle Hill (1.3 miles south-west) and Belmont Hospital (5.3 miles north-west).
Questions from Colebrook
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Which areas do you work in?
All of Devon, and the rest of the UK. Travel is included in the price.
What happens once I’ve sent photos?
We review the photos and send a fixed quote and the next dates we have.
Is it safe with children and pets around?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Can I get a quote without a visit?
Normally, yes. A close-up and a wider photo are enough to give a fixed price.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Do you need to take the bath out?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Landlord and trade work in Colebrook
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
We work for landlords, letting agents and housing providers in Colebrook as well as householders. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
Keeping it looking good
Once the work has cured, treat it gently:
- Don’t leave a chip unrepaired
- Do not let dyes or oils sit on the finish
- Wipe the bath dry after use in hard water areas
- Keep toiletries on a shelf rather than in the bath
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
About our accreditations · Every repair comes with a one-year guarantee.
