South Ayrshire · Scotland
Bath re-enamelling & resurfacing in Collennan, South Ayrshire
Bath re-enamelling for Collennan, without a refit. Send us photos for a fixed price, then book a visit.
- Resurfacing from £350
- A roll-top that’s seen better days
- A bath that stays dull however much you clean it
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
For developers and builders, we fix damage before handover. Several plots can be done in one visit to keep costs down.
Bath re-enamelling in Collennan without replacing anything
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. Typical jobs include a peeling or bubbling previous coating and staining under the taps and around the waste, across acrylic baths, cast iron baths and basins & shower trays.
The work is covered for a year after we finish. Just call us if there’s a problem and we will sort it.
- Area
- Collennan (KA10)
- Area hub
- South Ayrshire
- Cover
- A year, on every repair
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Signs you need bath re-enamelling in Collennan
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
If you can see any of these, send us a photo:
- A peeling or bubbling previous coating
- Several chips and rust patches
- Stains that won’t shift
- Wear marks under the taps
Questions to ask before booking
- Whether there are any call-out or travel charges
- The length of the guarantee and what it covers
- How changes to the job are handled
- How to care for the finish
Collennan: your questions answered
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Can pets and children be at home?
Keep pets and children away from the work area on the day.
Someone resurfaced my bath and it’s peeling. Can you help?
Typically, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Do the materials smell?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
How durable is a resurfaced bath?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before.
Can you change the colour of my bath?
Yes, most people go for white. Mention the colour you want when you send photos.
Keeping it looking good
Once the work has cured, treat it gently:
- Wipe the bath dry after use in hard water areas
- Leave the bath for the full curing time before using it
- Store bottles off the bath
- Fix dripping taps quickly
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Honest limits
A few problems are outside what a surface repair can do:
- A poorly supported acrylic bath, until it’s firmed up
- Damage hidden under a previous coating, until it’s stripped back
- Holes rusted through the metal
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
Also in Collennan
What we do, step by step
Nothing needs to be moved out of the room. We bring everything we need with us, lay protective sheets and start once you are happy with the plan. Most jobs take a full day, and you’re welcome to carry on with your day while we work.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can usually be used the next day.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Let us know which floor the room is on
- Mention any earlier repairs or resurfacing
Get a quote
If you’re in Collennan and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Advice
Should you replace it?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Prices start from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Why us?
- Same prices wherever you are
- Colour-matched on site
- One visit for most repairs
- Everything repaired in place
See our full price list and guide to resurfacing and replacement costs.
How we price bath re-enamelling
Resurfacing from £350. We don’t charge extra for travel to Collennan. The price comes down to:
- Where the damage is and how we get to it
- The type of damage
- Whether we combine several jobs
- The material
Our prices are the same across the UK, with no extra for Collennan. The job itself decides the price: the material, the amount of damage and how many items.
Quotes from your pictures
A couple of clear pictures is all it takes. Try to include:
- Your postcode, so we can check dates
- Details of any past repairs
- A wider photo showing the entire bath
- Any details about the material
Most clients in Collennan get their price from photos. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Collennan and the surrounding area
Collennan is about 1 mile north-east of Troon, in South Ayrshire. Jobs in Collennan are booked in like any other job: a fixed price from your pictures, and a technician at your door on the day. Collennan is one of 52 towns and villages in South Ayrshire we cover. We work right across the region, from Collennan to Glasgow (about 25 miles away).
Our technicians cover all of KA10 and the streets around it. If you are just outside Collennan, we cover Barassie (1 mile north-west), Loans (1 mile south), Troon (1 mile south-west), Dundonald (2 miles north-east) and Shewalton (3 miles north). Larger places within reach include Ayr (7 miles south), Prestwick (5 miles south), Heathfield (6 miles south), Belmont (8 miles south), Forehill (8 miles south) and Maybole (14 miles south).
Landmarks near Collennan
Typical jobs here are in homes near Marr College and Harbour Road garden. Collennan’s nearest station is Barassie station, about 0.8 miles west of the centre. Other landmarks nearby include Dundonald Castle Museum (1.9 miles north-east) and Biggart Hospital (4.8 miles south). Open spaces near Collennan include Caprington Loch.
About our accreditations · Every repair comes with a one-year guarantee.
