Lincolnshire · England
Bath re-enamelling & resurfacing in Collyweston, Lincolnshire
Bath re-enamelling for Collyweston, without a refit. Send us pictures for a fixed quote, then we come to you.
- Resurfacing from £350
- A coating lifting around the plughole
- Wear marks under the taps
Where we work around Collyweston
Collyweston is about 3 miles south-west of Stamford, in Lincolnshire. Our repair technicians come to homes and businesses in Collyweston and nearby villages, so nothing has to leave your home. Collyweston is one of 732 places in Lincolnshire we cover. Our nearest city page is Birmingham, about 58 miles away.
All of PE9 is covered, from the main roads to the quietest streets. From High Street, Collyns Way and Back Lane or anywhere nearby, a technician can come to you. Nearby, we also work in Easton on the Hill (1 mile north-east), Ketton (1 mile north-west), Tinwell (2 miles north), Great Casterton (4 miles north) and Tickencote (4 miles north). Within a short drive, we also cover Stamford (3 miles north-east), Bourne (12 miles north-east), Austerby (12 miles north-east), Market Deeping (10 miles north-east), Paston (12 miles east) and Deeping St James (10 miles north-east).
Landmarks near Collyweston
Our customers here include homes close to Church of St Andrew and the streets around them. The closest station to Collyweston is Stamford station, about 3.1 miles north-east. Nearby you will also find Stamford Brewery Museum (3.2 miles north-east) and Stamford and Rutland Hospital (3.7 miles north-east). Open spaces near Collyweston include Collyweston Quarries.
About our bath re-enamelling in Collyweston
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. Our repair technicians work on acrylic baths, cast iron baths and Victorian roll-tops, and people most frequently call us about stains that won’t shift and a roll-top that’s seen better days.
You get a one-year guarantee, the same in Collyweston as everywhere else we work.
- Where
- Collyweston (PE9)
- County
- Lincolnshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Collyweston
What else we do in Collyweston
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
FAQs for Collyweston
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Does the bath have to be removed?
No. We resurface it in place, so nothing else is disturbed.
Will there be fumes?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.
Are there extra charges for Collyweston?
We do not add a call-out fee. The fixed quote covers the visit and the work.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one, so let us know about it.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Common problems we fix in Collyweston
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
It’s worth getting a quote if you see:
- An outdated colour you’d like to change
- A period or roll-top bath worth keeping
- Wear marks under the taps
- Enamel that’s lost its shine and feels rough
Comparing quotes
- How soon you can use it again
- How long the guarantee is and what it covers
- What prep work is covered
- Whether the price is fixed and includes VAT
How it works
We turn up when we said we would, introduces themselves and checks the damage against your pictures first. The floor and nearby surfaces are covered before any work starts. The work itself takes the best part of a day, and we leave the room as we found it.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Let us know about parking or access
- Keep children and pets away from the room on the day
- Let us know if it has been repaired before
Getting a price
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Advice
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Aftercare tips
Simple care helps the repair last. We recommend:
- Use washing-up liquid and a soft cloth
- Store bottles off the bath
- Never use suction bath mats
- Rinse off hair dye, oils and bath bombs right away
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Prices and what affects them
Resurfacing from £350. Each job gets its own fixed quote. This is what makes a difference:
- How many items we do on one visit
- How many areas need work
- How hard the colour is to match
- What the surface is made of
A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with nothing added on the day.
Getting a price from photos
Photographing the damage takes a minute. Try to send:
- What it’s made of, if you know
- Where you are, by postcode
- Daylight if possible, and no flash reflection
- A photo taken from further back
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Can I fix it myself?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
What a repair can’t fix
To be straight with you, there are a few things a repair won’t fix:
- Leaking taps or wastes (a plumber’s job)
- A bath that is rusted through
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
About our accreditations · Every repair comes with a one-year guarantee.
