Lincolnshire · England
Bath Re-enamelling for Ketton homes
Full bath re-enamelling and resurfacing for homes and businesses in Ketton and across Lincolnshire. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Thin, worn enamel in places
- Brown or grey marks that don’t clean off
Signs you need bath re-enamelling in Ketton
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
These are the problems we’re asked about most:
- A dull, rough surface that won’t come clean
- Worn patches where water runs and sits
- Stains that will not shift
- An original cast iron bath that needs restoring
Comparing quotes
- Who will actually do the work
- What happens if they find more damage
- A fixed price, and whether VAT is included
- When it can be used again
How we handle bath re-enamelling in Ketton
Resurfacing renews the whole surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. Whether it’s a roll-top that’s seen better days and a coating lifting around the plughole, we can help, on acrylic baths, cast iron baths and pressed steel baths alike.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll sort it.
- Area
- Ketton (PE9)
- Area hub
- Lincolnshire
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What else we do in Ketton
FAQs for Ketton
Can you do more than one item on the same visit?
Of course, and it normally saves money. Just add the extra items to your pictures and we will quote them together.
Does re-enamelling smell?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Will the price change on the day?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
What does bath re-enamelling cost?
Resurfacing from £350. We give a fixed quote from your pictures. Send a close-up and a picture of the entire item and your postcode.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
What areas do you cover?
We work UK-wide. Prices do not change with location.
How soon can you come?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Can I fix it myself?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
How to look after the repair
After the repair has cured, a few habits help it last:
- Rinse off hair dye, oils and bath bombs straight away
- Store bottles off the bath
- Stick to gentle, non-abrasive cleaners
- Wipe the bath dry after use in hard water areas
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
What happens on the day
There is not much you need to do on the day. Let us in and show us the room, and we will get on with it. The job generally runs to a full day, tidy-up included.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Let us know if it has been repaired before
- Let us know which floor the room is on
- Keep pets and children out of the room while we work
How to get a price
To get a price, send two or three pictures through our quote form or ring us. We will say immediately whether it can be repaired.
Advice
What bath re-enamelling costs
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- The size and number of damaged areas
- Doing more than one item at once
- How easy the damage is to reach
- The material
Our prices are the same across the UK, with no extra for Ketton. The job itself decides the price: how much damage, what it’s made of and how many items.
Getting a price from pictures
It only takes a minute to photograph the damage. Try to send:
- Something in shot to show the size
- A close-up of the damage, in focus
- One picture of the entire bath
- Any earlier repairs or coatings
Email us pictures of the damage and a wider shot of the whole item, and tell us you are in Ketton, and we’ll come back with a fixed quote.
Ketton and the surrounding area
Ketton is about 3 miles south-west of Stamford, in Lincolnshire. From the centre of Ketton to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We cover 732 places in Lincolnshire, from the larger towns to small villages. Our jobs stretch from Ketton to Birmingham (about 57 miles away).
Here we cover the PE9 postcode area. You’ll find streets such as Church Road, High Street and Station Road, and we cover them all. We also cover the places around Ketton: Collyweston (1 mile south-east), Easton on the Hill (2 miles east), Tinwell (2 miles north-east), Empingham (3 miles north-west) and Great Casterton (3 miles north-east). Further out, we also cover Stamford (3 miles north-east), Bourne (12 miles north-east), Austerby (12 miles north-east), Market Deeping (11 miles east), Paston (13 miles east) and Deeping St James (11 miles east).
Near you in Ketton
Typical jobs here are in homes near Ketton Church of England Primary School, Church of St Mary and The Railway Inn. Ketton’s nearest station is Stamford station, roughly 3.4 miles north-east of the centre. Other landmarks nearby include Normanton Church Museum (3 miles north-west) and Stamford and Rutland Hospital (3.9 miles north-east). The countryside around Ketton includes Collyweston Quarries.
Repair or replace: which is better?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the following day. Our bath re-enamelling starts from £350. Set against the cost of replacement, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why us?
- One-year guarantee on every repair
- We come to you, anywhere in the UK
- Most jobs done in one visit
- Colour mixed on the day to match
See our pricing and guide to resurfacing and replacement costs.
What a repair can’t fix
Some jobs are not right for a repair, including:
- Acrylic that moves when you stand in it
- A bath split right through the body
- A bath that is rusted through
If in doubt, send photos and we will say what we think before booking.
Surfaces we repair
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
About our accreditations · Every repair comes with a one-year guarantee.
