Gloucestershire · England
Bath re-enamelling & resurfacing in Coombe Hill, Gloucestershire
Full bath re-enamelling and resurfacing at your home in Coombe Hill, with a one-year guarantee on every repair.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- A roll-top that’s seen better days
Landlords, agents and businesses in Coombe Hill
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Bath re-enamelling in Coombe Hill, done in place
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Whether it’s staining under the taps and around the waste and a dull, rough surface that won’t come clean, we can help, whatever the material.
Whatever the size of the job, you get the same one-year guarantee.
- Area
- Coombe Hill (GL19)
- Region
- Gloucestershire
- Guarantee
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What we’re called out for in Coombe Hill
Often the bath has just had decades of use. The body of the bath is normally perfectly sound.
You may need us if you’ve spotted:
- A coating lifting around the plughole
- An original cast iron bath that needs restoring
- Several chips and rust patches
- A bath in a colour that no longer suits
Questions to ask before you book
- When it can be used again
- What prep work is covered
- Who will actually do the work
- How the room is protected while they work
Should I try a DIY kit first?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Your questions about bath re-enamelling in Coombe Hill
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Do you cover the entire of Gloucestershire?
Across the UK, and that includes Coombe Hill. Prices do not change with location.
Do you need to take the bath out?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
Is my repair covered?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
How do I get a price for bath re-enamelling in Coombe Hill?
Prices start from £350. Every job gets a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo with your GL19 postcode.
Can you re-enamel a roll-top bath?
Yes. Inside and out if you’d like.
Can a failed resurfacing be redone?
Generally, yes. We strip the failing coating and resurface it properly. Mention it when you send photos.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
About Coombe Hill
Coombe Hill is about 3 miles south of Tewkesbury, in Gloucestershire. We visit homes and businesses in Coombe Hill and nearby villages, so there’s no workshop to go to. Coombe Hill is one of 470 places in Gloucestershire where we work. You can also see our page for Birmingham, about 38 miles away.
We cover every part of the GL19 postcode area. You’ll find streets such as Meadow Brown Road, Whimbrell Drive and Turnstone Close, all of which we cover. We also cover the places around Coombe Hill: The Leigh (1 mile south-west), Evington (1 mile south-west), Barrow (2 miles south), Tredington (2 miles north-east) and Stoke Orchard (2 miles east). We also work in nearby towns such as Cheltenham (5 miles south-east), Gloucester (7 miles south-west), Stroud (14 miles south), Tewkesbury (3 miles north), St Paul's (5 miles south-east) and Lansdown (5 miles south-east).
Landmarks near Coombe Hill
Locally, our jobs take us to homes close to The Swan Inn and the streets around them. Coombe Hill’s nearest station is Cheltenham Spa station, roughly 4.1 miles south-east of the centre. Further afield, we also cover the area around Cheltenham General Hospital (5.2 miles south-east) and John Moore Museum (3.3 miles north).
What we cannot put right
A repair isn’t always the answer, and we would rather say so up front. Repairs will not solve:
- Steel that has corroded right through
- Leaking taps or wastes (a plumber’s job)
- An acrylic bath that flexes badly underfoot
Send us pictures and we will tell you honestly.
Surfaces we repair
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
How we price bath re-enamelling
Prices start from £350. Every quote is fixed and free. What we take into account:
- What the surface is made of
- Previous DIY repairs that have to come out
- How hard the colour is to match
- The type of damage
We charge the same wherever you are, with no extra for Coombe Hill. The job itself decides the price: the material, the amount of damage and how many items.
Send pictures for a quote
You can take the photos on your phone. Just ensure we can see:
- The postcode, so we can plan the visit
- One picture of the entire bath
- One sharp close-up of the damage
- Natural light rather than flash
Send us a picture of the damage and a wider shot of the whole item, with your GL19 postcode, and we will come back with a fixed quote.
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
How to care for the repair
How the surface is treated afterwards matters:
- Stick to gentle, non-abrasive cleaners
- Do not leave bottles, razors or sponges standing on the surface
- A dripping tap should be fixed promptly
- Never use suction bath mats
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and do not leave bottles or razors standing on the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Towns and villages near Coombe Hill
Also in Coombe Hill
What happens on the day
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Allow a full day from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
Getting ready for the visit
- Keep a parking space free if you can
- Keep children and pets away from the room on the day
- Clear toiletries, mats and anything else from around the area
Get a quote
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
