Cheshire East · England
Bath Re-enamelling in Coppenhall Moss
Full bath re-enamelling and resurfacing for homes and businesses in Coppenhall Moss and across Cheshire East. Free, fixed quotes from your photos.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A coating lifting around the plughole
Bath re-enamelling in Coppenhall Moss, done in place
When a bath is structurally fine but worn out on the surface, re-enamelling is typically the most cost-effective option. It avoids removal, plumbing and re-tiling. Whether it’s several chips and rust patches and an outdated colour you’d like to change, we can help.
A one-year guarantee comes as standard, so you are not left on your own once we have gone.
- Location
- Coppenhall Moss (CW1)
- Region
- Cheshire East
- Cover
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What a repair cannot fix
Before booking, it’s worth knowing the limits:
- Plumbing leaks, which need a plumber
- Acrylic that moves when you stand in it
- A bath split right through the body
Not sure? Send photos and we will give you a straight answer before you book.
What we work on
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
The process
We turn up when we said we would and checks the damage against your photos first. The floor and nearby surfaces are covered before any work starts. Most visits take most of the day, and the room is left clean and tidy.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
Preparing for the visit
- Tell us if there are stairs or a lift
- Move bottles, mats and clutter away from the area
- Let the surface dry out before the visit
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job without visiting.
Related advice
How to look after the repair
Most damage we see is avoidable. A few tips:
- Never use suction bath mats
- Wipe the bath dry after use in hard water areas
- Use washing-up liquid and a soft cloth
- Repair dripping taps early
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Why repair rather than replace?
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling renews the whole surface without moving it. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Why Coppenhall Moss clients choose us
- Generally one visit, start to finish
- We come to you, anywhere in the UK
- Free fixed quotes from pictures
- Dust sheets down, tidy finish
Read our pricing and resurfacing vs replacement cost guide.
Coppenhall Moss: your questions answered
Can you redo someone else’s repair?
Yes, we frequently do. It can add a little time, which we include in the quote.
What if the damage is worse than the photos show?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Is my repair covered?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
How long does re-enamelling take?
Usually a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Do you cover the entire of Cheshire East?
Across the UK. Prices do not change with location.
When can you do it?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Coppenhall Moss and the surrounding area
Coppenhall Moss is about 2 miles north of Crewe, in Cheshire East. From the centre of Coppenhall Moss to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in 254 places in Cheshire East. We work right across the region, from Coppenhall Moss to Manchester (about 26 miles away).
All of CW1 is covered. From Warmingham Road, Waldron's Lane and Groby Road or a nearby road, we can come to you. We also cover the places around Coppenhall Moss: Lane Ends (1 mile north-east), Leighton (1 mile south-west), Coppenhall (1 mile south), Bradfield Green (2 miles west) and Warmingham (2 miles north). Larger places within reach include Congleton (10 miles east), Nantwich (5 miles south-west), Knutsford (13 miles north), Middlewich (5 miles north), Sandbach (4 miles north-east) and Holmes Chapel (6 miles north-east).
Near you in Coppenhall Moss
Around Coppenhall Moss, we work in homes near Coppenhall High School, Mablins Lane Community Primary School and St Michael's Church. For rail, the closest station is Crewe station, roughly 2.3 miles south of the centre. Well-known places in the area include Crewe and Nantwich (2.8 miles south-west) and Leighton Hospital (1.5 miles west).
Places near Coppenhall Moss
What else we do in Coppenhall Moss
What we’re called out for in Coppenhall Moss
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, typically first under the taps and around the waste.
Look out for these signs:
- A bath in a colour that no longer suits
- Lots of chips and rust spots
- Enamel that is lost its shine and feels rough
- Wear marks under the taps
Before you book anyone
- Who turns up on the day
- Whether the price covers travel
- How the room is protected while they work
- What happens if the damage is worse than the pictures show
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
About our accreditations · Every repair comes with a one-year guarantee.
