Norfolk · England
Bath re-enamelling & resurfacing in Costessey, Norfolk
Local bath re-enamelling for Costessey: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A coating lifting around the plughole
- Worn patches where water runs and sits
Bath re-enamelling in Costessey, done in place
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Whether it’s a period or roll-top bath worth keeping and an outdated colour you’d like to change, we can help, on acrylic baths, Victorian roll-tops and cast iron baths alike.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Costessey (NR8)
- Area hub
- Norfolk
- Guarantee
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Should you replace it?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the next day. Prices start from £350. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- A year’s guarantee on all work
- A fixed quote before you book
- Honest advice, even when it means no job
Take a look at our full price list or bath cost comparison.
How the visit works
We agree an arrival time beforehand, so you are not left guessing. On site, it takes most of the day for most jobs. We leave the room clean and ready to use once it has cured.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Mention any earlier repairs or resurfacing
- Let us know about parking or access
How to get a price
If you are in Costessey and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Advice
What a repair can’t fix
Before you book, it’s worth knowing the limits too:
- A poorly supported acrylic bath, until it’s firmed up
- Problems we can’t see until an old finish comes off
- Holes rusted through the metal
If in doubt, send photos and we will say what we think before you book.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
When to call us in Costessey
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths dull the surface, typically first under the taps and around the waste.
If you can see any of these, send us a picture:
- Stains that won’t shift
- A coloured bath you want in white
- A roll-top that’s seen better days
- An old resurfacing that is failing
Questions to ask before you book
- Whether the price is fixed and includes VAT
- How to care for the finish
- Whether there are any call-out or travel charges
- What happens if the damage is worse than the pictures show
Costessey questions
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Do you resurface freestanding baths?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Will the price change on the day?
We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
Is there a smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
Can you quote from photos?
Nearly always. If pictures do not show enough, we’ll ask for another angle.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and we will quote them together.
Aftercare tips
So the finish stays in good condition:
- Wipe the bath dry after use in hard water areas
- Never use suction bath mats
- Do not let dyes or oils sit on the finish
- Leave the bath for the full curing time before using it
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Where we work around Costessey
Costessey is about 4 miles north-west of Norwich, in Norfolk. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Costessey is one of 797 towns and villages in Norfolk where we work.
Every address in NR8 is within our area, from the main roads to the quietest streets. You will find streets such as The Street, Hinshalwood Way and The Croft, and we cover them all. Close by, we cover Drayton (1 mile north-east), Bowthorpe (2 miles south), Taverham (2 miles north), Hellesdon (2 miles south-east) and Thorpe Marriott (2 miles north). Larger places within reach include Norwich (4 miles south-east), Dereham (12 miles west), Wymondham (7 miles south-west), Sprowston (4 miles east), Thorpe St Andrew (6 miles east) and Attleborough (13 miles south-west).
Around Costessey
Around Costessey, we work in homes near Ormiston Victory Academy, Church of St Edmund and St Augustine's Catholic Primary School and the streets around them. The nearest railway station is Norwich station, roughly 4.6 miles south-east of the centre. Other landmarks nearby include Hellesdon Hospital (1.6 miles east) and Costessey Hall (0.8 miles west). For a walk, there’s Wensum Local Nature Reserve.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Different materials, different repairs
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
For landlords and businesses
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll arrange it.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Nearby places to Costessey
Other services in Costessey
About our accreditations · Every repair comes with a one-year guarantee.
